20 Most Recent Nordic Track NordicTrack A2750 PRO Treadmill - Page 4 Questions & Answers

https://www.manualslib.com/manual/786359/Nordictrack-Ntl14908-0.html

My treadmill has a little steel rod that flips in and holds the bed up' When you want the bed down you pull the rod back out and it lets it come back down.

Have you ever found the answer to this problem?

Sounds like the overlay on the console has stopped working. If you get beeps on all buttons but not the ones in question, this will need replacing. It’s quite an easy job once you have the parts. Try eBay or the shop you got it from.

check to see if there is a smaller board in the unit. There maybe relays between the main board and the motor.

GO to Nordic track website and look under support. It should direct you to what error codes mean.

Try this https://support.nordictrack.com/contact-us

This is a situation the controller board motor is Faulty. They controlled the console CPU BOARD. with 8-12VdC For CMOS Circuit.,this board has 3 control power supply Some IGTB is faulty: 1) Main motor 2) Elevation motor 3) Console Control HOwever tight the connector coming from controller board motor to the Console very well, and clean it. Otherwise replace the Controller board motor. Blessing. [email protected] cell+whatsAPP:+50588611441 https://www.youtube.com/watch?v=p6PkBZrh4KM

https://service.nordictrack.com/CustomerService/pdfDownload.do?fileName=NTL19007.0-259851.pdf&directory=%2Fpdf%2F According to the manual ... you need the hex drive key to adjust the belt back to the center