20 Most Recent Nordic Track NordicTrack A2750 PRO Treadmill Questions & Answers

Did you ever figure out an answer to this? Mine is doing the same thing

Nordic Track... | Answered on Sep 02, 2019

A treadmill will shut down from to much friction which is due to high motor current because the walkbelt and deck are not properly lubricated. I would recommend applying .5 oz of lubricant on the deck every 3-6 months or 100 hours of use. This will extend your treadmill's life many years.

Nordic Track... | Answered on Jan 16, 2016

see the video and proceed. God bless you

Nordic Track... | Answered on Jul 19, 2013

see the video and proceed according. God bless you

Nordic Track... | Answered on Jul 19, 2013

You must watch the flexible cable or connector from display board vs Lower
Board or Main Motor Controller.
Then you must isolate the Main Motor Controller from Power Supply coming from coil or Transformer. +Pull out the fuse and turn Off.
See the block diagram that I did as people like you for yourself take carefully.

11_29_2011_4_39_37_pm.gifFinally to make short circuit in Boar or component. sincerely.


Nordic Track... | Answered on Nov 29, 2011

1Step:Watch this videos tips:
11_29_2011_4_21_15_pm.gifAttached is the block diagram that I DID for any treadmills, you will see how the main motor board has aprox90% of functions for any treadmills.

Good luck, sincerely. G-d bless you,


Nordic Track... | Answered on Nov 29, 2011

11_29_2011_4_15_08_pm.gif11_29_2011_4_15_29_pm.gif4step: tight the flexible cable from Keypanel vs Display board , then tight the Display Board connector vs Lower Board( Main Motor Controller) See the block diagram how the Main Motor Controller has 90% of functions of any treadmills. Good luck, sincerely. G-d Bless you.


Nordic Track... | Answered on Nov 29, 2011

This make all this adjustments:
Make sure the sensor speed is as close as possible to the pulley withouttouching it. You will see a magneton the face of the pulley; make sure the sensor is aligned with themagnet. There is a screw thatholds the sensor in place that needs to be loosened to adjust thesensor. Re-tighten the screw whenfinished.
Good luck, sincerely.


Nordic Track... | Answered on Nov 29, 2011

Dear Sir:

Hello, I hope everything is O.k

Now i will help you quickly.

1) You must go to the website following: www.fitnessrepairparts.com

2) You will find anything that you NEED! FOR TRAINING FITNESS !.

Do it and GOOD LUCK!

Enjoy it, Sincerely.


Nordic Track... | Answered on Sep 06, 2011

Welcome to FixYa!

Check if the latch knob is facing the correct direction. It should be facing inwards, not outwards.
The upper barrel should insert through the latch knob and lower barrel if the latch knob is placed in the correct direction. Please refer to the image below.


Note that assembling the storage latch is crucial. It can damage the latch knob if installed incorrectly.

I hope this will help.
Thank you for using FixYa and have a great workout!

Nordic Track... | Answered on Mar 14, 2011

take hood off and check the front roller. you mite have to take the side foot rail off to view the roller

Nordic Track... | Answered on Mar 11, 2011

Not finding what you are looking for?
Nordic Track NordicTrack A2750 PRO Treadmill Logo

37 questions posted

Ask a Question

Usually answered in minutes!

Top Nordic Track Exercise & Fitness Experts

Ross Metcalfe
Ross Metcalfe

Level 2 Expert

135 Answers

Treadmill Repairs...
Treadmill Repairs...

Level 2 Expert

338 Answers

Android Man
Android Man

Level 2 Expert

278 Answers

Are you a Nordic Track Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Nordic Track Exercise & Fitness

  • Nordic Track Exercise & Fitness

Most Popular Question

am having difficult

  • Exercise & Fitness