20 Most Recent Vivitar ViviCam 5022 Digital Camera - Page 2 Questions & Answers

Bear in mind that the Vivitar 5022 does not charge batteries. It uses standard AAA batteries. If you want to use rechargeables, you must charge them outside the camera using any AAA recharger such as those available at just about any department, electronics, or office-supply store.

clean the battery contacts in the camera battery compartment and then try with a well charged battery.

use wb40 solution on the power buttton & try then.

The camera will work with any computer and operating system.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

SD and SDHC cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

You could try formatting your SD/Memory card and see if that fixes it.Hope that helped :)

You may download the manual here.

Make sure you're not in the macro mode. There's a switch on the end of the camera, near the SD card slot. Set this switch to the mountain position.Also bear in mind that the flash is only for still photos, not for videos.

Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa.

Make sure you're not in the macro mode. There's a switch on the end of the camera, near the SD card slot. Set this switch to the mountain position.Also keep in mind that the flash is for still photos only, not for videos.

Make sure you're not in the macro mode. There's a switch on the end of the camera, near the SD card slot. Set this switch to the mountain position.Also bear in mind that the flash is for still photos only, not for videos.

You don't. The 5018 uses standard AAA batteries. If you want to recharge them, you must do it outside the camera using a separate charger.

Yes.

The 5022 is a camera, not a battery charger. It uses standard AAA batteries. If you use rechargeable batteries, you must charge them outside the camera using a separate battery charger.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa.

You need to be out of the macro mode. There's a switch on the end of the camera, near the SD card slot. Set this switch to the mountain position.Also bear in mind that the flash is for still photos only, not for videos.

You can download the software and manual here.You don't need the Vivitar software to use your camera. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa.

If your memory card is full, there are several things you can do.1) Swap in a new memory card.2) Download the pictures from your card to a computer and then format the card to prepare it for further use.3) Format the card to prepare it for further use, discarding all the pictures on it.