20 Most Recent Vivitar ViviCam 5022 Digital Camera - Page 3 Questions & Answers

You should be able to buy SD cards at just about any department, electronics, or office-supply store.

Make sure you're not in the macro mode. There's a slide switch on the end of the camera, near the SD card slot. Set this switch to the mountain position.Also bear in mind that the flash is for still photos only, not for videos.

Make sure you're not in the macro mode. There's a slide switch on the end of the camera, near the SD card slot. Set this switch to the mountain position. Also bear in mind that the flash is for still pictures only, not for videos.

Make sure you're not in the macro mode. There's a slide switch on the end of the camera, near the SD card slot. Set this switch to the mountain position.Also bear in mind that the flash is for still photos only, not for videos.

Make sure you're not in the macro mode. There's a slide switch on the end of the camera, near the SD card slot. Set this switch to the mountain position. Also bear in mind that the flash is for still pictures only, not for videos.

Make sure you're not in the macro mode. There's a slide switch on the end of the camera, near the SD card slot. Set this switch to the mountain position.Also bear in mind that the flash is for still pictures only, not for videos.

Make sure you're not in the macro mode. There's a slide switch on the end of the camera, near the SD card slot. Set this switch to the mountain position.Also bear in mind that the flash is for still photos only, not for videos.

Make sure you're not in the macro mode. There's a slide switch on the end of the camera, near the SD card slot. Set this switch to the mountain position.Also bear in mind that the flash is for still pictures only, not for videos.

You can download the Vivitar software here.You don't need the Vivitar software to use your camera. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa.Here's the corporate contact information.

Make sure you're not in the macro mode. There's a slide switch on the end of the camera, near the SD card slot. Set this switch to the mountain position.Also bear in mind that the flash is for still pictures only, not for videos.

Make sure you're not in the macro mode. There's a slide switch on the end of the camera, near the SD card slot. Set this switch to the mountain position.Also bear in mind that the flash is only for still photos, not for videos.

Press the MODE button until the movie camera icon is displayed.

Make sure you're not in the macro mode. There's a slide switch on the end of the camera, near the SD card slot. Set this switch to the mountain position.Also bear in mind that the flash is for still photos only, not for videos.

Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa.

You can download the Vivitar software here.You don't need to use their software. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa.

Make sure you're not in the macro mode. There's a switch on the end of the camera, near the SD card slot. Set this switch to the mountain position.Also bear in mind that the flash is for still pictures only, not for videos.

Make sure you're not in the macro mode. There's a switch on the end of the camera, near the SD card slot. Set this switch to the mountain position.Also bear in mind that the flash is for still photos only, not for videos.

Yes, up to 8GB.

In the playback mode select the video and then press the Menu/OK button.

You can download both the software and the manual here.You don't need any special software to use your camera. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or, despite what I said earlier, you can use any photo cataloging program such as Picasa.