Sylvania LC195SLX LCD TV - Answered Questions & Fixed issues

The head set won't work on the aux the aux is for an input such as a mp3 player or phone . The tv should have it's own jack it will say headphones or have a picture of headphones on it just plug the headphones into the jack plug and you should get sound

029,022,021,027. Try these codes. If you wish to get more, check the sites linked here. It has setup codes, and setup procedure to many popular brand remote controls. Pull up older posts. http://electrohelponline.blogspot.com/ http://electro-medical.blogspot.com/

Check and replace its tuner.

It looks like your TV doesn't have a digital tuner in it. Without that you won't be able to receive any broadcast television stations. The spec sheet is here: LC195SLX the tuner is listed as just ATSC/NTSC - not digital. You will need a cable or satellite box to receive stations.

If all other buttons except power do works well, the remote control need cleaning. If you wish to get more details, check the site linked below. Pull up older posts there. Check the site with patience, as it has over 2400 posts now. All are related to electronic equipment repair help. If you search the site in Timeslide option, which can be selected from the drop down list at the top left of the display window, it will be easy to locate the related post. You can also do a search by type in the brand name to your device into its search box at the top right of display window. One among the older post have details about how to repair, clean and check a remote control. Check it out.http://electronicshelponline.blogspot.com/

It sounds that your remote control need cleaning. If you wish to get more details, check the site linked below. Pull up older posts there. Check the site with patience, as it has over 2400 posts now. All are related to electronic equipment repair help. If you search the site in Timeslide option, which can be selected from the drop down list at the top left of the display window, it will be easy to locate the related post. You can also do a search by type in the brand name to your device into its search box at the top right of display window. One among the posts have details about how to clean and check a remote control.http://electronicshelponline.blogspot.com/

when turning on the tv I get a screen states no channel is registered. and press hold enter key on the remote control for 3 seconds.. one problem is I dont have a remote to the tv only an ge unversal remote which can the get programed

Go to the TV's menu and go to "picture", or "setup". If you are watching one of those annoying widescreen movies, then there's not really much you can do about it other than zooming in. At your own risk.

THE CODE IS 1028

you can buy another one HERE on Amazon for $26.00Tallon41

stop spraying polish

Replace Lcd screen.

Hi, my name is Cheri Torres and I work with DISH Network Customer service. We have a few different codes for each of our different models of remotes. I will list here for you the best codes for each of our more popular models of remotes and the instructions for addressing the remote to the TV. I hope this information helps and if you have any other questions please let me know! Remotes models Remote codes 3.0, 3.1, 3.2, 3.4 IR remotes - codes 632, 569, 566, 671, 733, 515, 568, 764.5.0, 5.2, 5.3, 5.4 IR remotes - codes 632, 569, 566, 536, 733, 672, 660. 4.0 and 4.4 IR/UHF remotes - codes 733, 569, 566, 632, 764, 664.6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 733, 569, 566, 654, 672, 632, 764.20.0 IR and 21.0 IR/UHF remotes - codes 733, 672, 777, 566, 764, 527.Instructions for addressing the remote to the TV1. Press and hold down the TV mode button until all the mode buttons light up red. 2. Enter the 3 digit code using the keypad. 3. Press the pound(#) button once. 4. Test the functionality of the TV.

Hello! I hope that you have gotten this resolved, but if not, here are some steps to do so. You can program the remote to the TV first and then use that for this, or you can use the buttons on the TV itself.

Remote to TV Steps:

1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code
527
733
632



Satellite picture back:

If you are at TV1, where the receiver box is located, the tv needs to be on channel 3 or 4.
If you are using a coax cable, the TV needs to be on 3 or 4.
Depending on the cable that is running between the receiver and the tv, the tv may need to be on an input, such as video 1 or 2. If you are at the TV2 location, where there is no receiver, then the tv needs to be on channel 60 or 73.
If you are using an HDMI cable, then the TV will need to be on an HDMI input
If you are using Component cables, your TV will need to be on a component input. (Usually Comp 1 or 2)
If you are using RCA cables, then the TV will need to be on a VIDEO input (Usually Video 1 or 2)


Becki Barned
DISH Network Customer Service
[email protected]

Hello! This can be frustrating to watch!! To change the format on your DISH remote, all that you need to do is press the * button below the number 7 on the keypad. This will change the format for the TV so that you find the one that suits you best. The best that I have found is Zoom. I hope this help!


Becki Barned
DISH Network Customer Service
[email protected]

Hi
You will have to open the back of the television to repair the television, and care must be taken by unplugging the power plug of the television.
A common problem for these is bad capacitors in the power supply, Remove the back from your Television and look at the power supply on the left hand side.

You will see roughly around 9 x capacitors that are bulged / domed shaped on top usually these are valued at 3300uf 10V any that have bulged or leaked a brown like substance should be changed.
This will cure the problem as they overheat being sat next to a heatsink that gets very hot!
Try and change them for the same 3300uf but a higher voltage.
Hope this help in solving the problem and do take care because it contain high voltages

The PDF Manual at the link below shows how to programme your remote along with the possible codes for Sylvania TVs.

http://www.carltonbale.com/dish/remote/remote.pdf

If one of these work then another option would be to purchase a remote as the links below.

Universal
http://www.emtcompany.com/sylvania-lc195slx-remote/rc64.html

Original
http://www.electronicadventure.us/Merchant2/merchant.mv?screen=prod&store_code=EA&product_code=NH000UD

The PDF Manual for your TV can be downloaded at the link below.

http://www.sylvaniaconsumerelectronics.com/product/index.php?id=9

You should be able to use the CH UP & CH DOWN on the front of the set to select the required input.

I'm just finishing for the night (time 00:30 in UK). If you need any further assistance then can I ask that you leave 8 hours before you respond to avoid this being passed to another expert.


Cheers

Andy

Here is the manual you are looking for http://tv.manualsonline.com/manuals/mfg/osram_sylvania/lc195slx.html ... hope this helps

The main power supply has failed
Look into having a tech replace it

You have to change the second screen resolution for you to be able to use second screen. Sometime 800X600 or 1048X760 will work.