20 Most Recent Panasonic KX-TG2356 Cordless Phone - Page 2 Questions & Answers

hello,please kindly try the method below.
press locator botton on base unit for three seconds,then you kindly push flash button on handset for three seconds also.this will automatically register phone to base unit.but if it doesn't work for you,try the link underneath.
www.panasonic.com/consumer_electronics/telephones/ts_guide1.asp

thanks,you are highly appreciated.

Try giving the keypad a light spritz with WD40, and push each several times. That should clean and lubricate the keys and solve your problem.

Display Language
You can select either “English” or “Spanish” as the display language. The factory
preset is “English”.
• If you select a language you cannot read, change the display language again

1 Press [MENU].
2 Scroll to “Initial setting” by pressing [up]
or [down], then press Select.
3 Scroll to “Change language” by pressing [up]
or [down], then press Select.
4 To change from English to Spanish, press
Español.
To change from Spanish to English, press
English.
• The display changes to the selected language.
• You can also select a language by pressing [up] or
[down].
5 When Spanish is selected, press Salvar, then press [OFF].
When English is selected, press Save, then press [OFF].

http://service.us.panasonic.com/OPERMANPDF/KXTG2356.PDF

User manual is here: http://service.us.panasonic.com/OPERMANPDF/KXTG2356.PDF

The solution is this - unplug the base unit then plug it back in. After that it worked fine.

unplug the base and when you plug it back in
the handset should work

unplug the base unit and when you plug it
back in the handset should work

you would need 3-way calling, a feature offered by your phone provider for a fee.

Please take the time to rate this solution

Thanks for using Fix Ya

Press [GREETING CHECK], then press [ERASE] while the recorded
message is being played.
• The unit will answer calls with a pre-recorded greeting

Pleas don't forget to rate me.

your message is set for 3 second delay and no record of messages i dont know particular system you use but you gotta go threw your book and set the settings to a 30 second message and 1 minute message from peeps
i had the same problem like this before with my uniden

*60 follow instructions when calling

I'd like to tell you folks what the solution to the problem was, but I can't because you have not signed up for the Premium Assistance Plan yet. So if you really want to help people, don't try to get them to pay for an answer to a problem, and then try to convince them to post back a solution to a problem for free. You guys are about as transparent as clear air. I'll seek an answer elsewhere.

Call your number.  Hit star (*) or 01 while the message is playing. Phone should prompt you to enter your code.

It sounds like the phone system base station is burned out.

Press the mute button to turn mute off.

I don't think that is possible on that model of phone. This is a phone with only the basic features and a fixed ringtone.