20 Most Recent
Panasonic KX-TG2356 Cordless Phone - Page 6 Questions & Answers
Panasonic KX-TGD530 phone unit stuck in continuous incoming call loop.
That is an odd set of events. It is funny, we have seen this model crop up a number of times recently, You have done all the things I would have suggested. My only observation is that disconnecting power for the base station for 60 seconds is not really long enough to dissipate power and RAM memory. I would disconnect last thing at night and in the morning when you wake, press and hold the locator button for a minute to make sure all the power is gone from internal components. Then reconnect it to phone line and power.
Urgent help needed Panasonic phone can't call out or receive calls
Disconnect all the phones. Then plug in one simple phone to the main incoming phone jack. This is normally a larger box and near the front door or incoming power distribution board. If that works, you have a faulty phone somewhere in the house. If that phone fails, your telco cut you off or there is a line fault.
How do I silence the ringer on my Panasonic PNLC1040?
The Panasonic PNLC1040 is the charger for the KX-TGFA30 handset of the cordless phone system. One of the phone systems with this handset and charger is the KX-TGF340. You can set the Ringer Volume to off in the Menu of the handset (see page 30 of the manual). Make sure that the phone system is in Standby (no calls in or out or no other handsets are in use). Press Menu. Type in # 1 6 0. Alternatively, navigate to Settings with the Up/Down arrows, press Select (see the label on the LCD screen for the two soft keys above Talk and Off). Navigate to Ring Adjustments and select this. Select Ringer Volume. Use the Up/Down arrows to set the ringer volume to Off and then press the key for save. Press Exit to leave the menu system.
There is also a silent mode that turns off the ringer for all handsets and the base (or a select group of handsets). The basic silent mode is set by pressing Menu # 2 3 8. Select On or Off and Save. Set the start and end time of the silent time schedule. Press OK as needed. Use * to set AM/PM. Save and then press Exit to leave the menu system. This is described on pages 35-36 in the manual.
The manual is available at ManualsLib here:
https://www.manualslib.com/products/Panasonic-Kx-Tgf340-3819542.html . The link to page 30 is
https://www.manualslib.com/manual/939182/Panasonic-Kx-Tgf340.html?page=30#manual . For the silent mode, see page 35 on:
https://www.manualslib.com/manual/939182/Panasonic-Kx-Tgf340.html?page=35#manual
I hope this helps.
Cindy Wells
2 of my panasonic kx-tg6541 phones do not work, no ring, no tone, no speaker.
You may have exceeded the REN value of the number of phone on your phone line. Try this
Unplug all phones, from main and the cradle, remove all handset batteries.
The one that is hard wired to the phone jack. plug in the mains, plug in the base to telephone jack. Put the batteries in the hand set and verify it works.
Now go to each extension one by one, plug those in and adding the handset batteries and verfiying each one works. You may get to a stage where the last one doesn't work.
Not finding what you are looking for?