20 Most Recent Bosch 24 in. SHU43 Built-in Dishwasher - Page 7 Questions & Answers

0helpful
1answer

Shx33a05uc won't start washing

bosch smu -4052 will not fill with water
8/20/2012 5:19:45 PM • Bosch 24 in.... • Answered on Aug 20, 2012
0helpful
1answer

Its out of work and shows E:15

This error message is normally an indication that there has been an overspill of water in to the base and triggered the antiflood mechanism.Try tilting the dishwasher back to allow excess water to run out and then retry the wash cycle. If it still gives the E15 code then there is a leak on the system.
8/12/2012 6:49:31 AM • Bosch 24 in.... • Answered on Aug 12, 2012
0answers
0helpful
1answer

Bosch she45 dishwasher code c6

Fan -Related Problem code c6 Means the Fan Rotation to too low Durning Operation
7/9/2012 7:38:54 PM • Bosch 24 in.... • Answered on Jul 09, 2012
0helpful
1answer

I have a shu43 bosch dishwasher and the whole machine is dead. No power. The circuit breaker is good but I would have to pull the dishwaher out to check the outlet. Is there an internal fuse?

There is no internal fuse (at least I've not seen or replaced any) on Bosch dishwashers. The most typical problems for Bosch are: 1) one of the power cord connections to the internal wiring is corroded and doesn't make a contact; or 2) the power button has failed.The number one is so far the most common problem. To check: Turn off the power to the dishwasher by any means necessary. Remove the kick panel on the bottom. There should be a small metal box with power cord and 2 or 3 wires coming into it. Remove screw(s) holding the cover on that box. There should be 2 or 3 wires connected to the power cord wires by wire nuts. Any burnt insulation or wire nut will be the problem area. Cut burnt wires, remove 1/2" of insulation and clean of both connecting wires to bare copper. If you have an electrical contact grease - apply to copper. Install new wire nut.Good luck,Vlad with First Choice Appliance, Sacramento, CA
6/29/2012 1:27:55 PM • Bosch 24 in.... • Answered on Jun 29, 2012
0helpful
1answer

My Bosch dishwasher keeps back filling from the sink or garburator.. Is there a p-trap in it?

there is a p - trap sort of, your drain hose is meant to work as one, when properly installed the hose will have a hole drilled for it to come ththat is slightly higher than the drain of the sink
6/22/2012 4:15:05 AM • Bosch 24 in.... • Answered on Jun 22, 2012
0answers
0helpful
1answer

How do I level my dishwasher?

check with a level. from front to backon each top side and accross the top of dish washer.
2/2/2012 9:12:03 PM • Bosch 24 in.... • Answered on Feb 02, 2012
0helpful
1answer

BOSCH md SHU43C02UC MANUAL

1/25/2012 11:29:13 PM • Bosch 24 in.... • Answered on Jan 25, 2012
0helpful
3answers

I am trying to remome the control panel on my

Hello Joseph, welcome to Fixya.


I can provide you with a tech. guide, but you`ll need to post an email address for me to send it to.

With the guide you can practically tear that dishwasher completely apart if you`re even a little mechanically inclined, it`s pretty good.

I`m not sure if I understand the problem you`re having, based on your description though.

Let me know if you either want me to send that guide or need further assistance.

I`ll watch for your reply,

macmarkus :)
1/10/2012 8:53:10 PM • Bosch 24 in.... • Answered on Jan 10, 2012
Not finding what you are looking for?
Bosch 24 in. SHU43 Built-in Dishwasher Logo

1,005 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Dishwashers Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Bosch Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bosch Dishwashers

  • Bosch Dishwashers

Most Popular Question

dishwasher smells

  • Dishwashers
Loading...