Top 20 Life Fitness 9500RHRT Recumbent Bike - Page 4 Questions & Answers

If you wish to get some details treadmill repair ; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

If you wish to get some details; visit the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

If you wish to get some details; check the site linked here. Pull up older posts. http://electro-medical.blogspot.com/

Here's a link to a owner's manual for your treadmill John. https://www.greenfitco.com/Fitness_Manuals/Life%20Fitness/Life%20Fitness-%20OM%20TR%2097TE-%2095TE-%2095T-%2097T-%2093T-%20M051-00K58-A159%20English.pdf

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electro-medical.blogspot.com/

Error codes listed here: http://www.sportsmith.net/Categories.aspx?ID=29e3caae-4c42-4648-a7df-e346a1912e9b

Get a Polar heart rate sensor. More reliable and the screen will read it.

http://www.profitnessmd.com/Manuals/CTG%20Operations%20Manual.pdf

Next Generation 9100, 9500HR, 9700HR, 9700HR with Decline Treadmills

• Press and hold the "Pause" key while pressing the "Clear" key twice.

Hope this helps! If anything else please visit us online http://www.sportsmith.net/productsearch.aspx?dsNav=N:10598 or give us a call at 888-713-2880

Repair Parts for LifeFitness Steppers Belts Batteries Springs SPORTSMITH... Please have your model and serial number available. We may have the diagram for your stepper. This will show you the location for your battery.

Replacement Parts for Fitness Exercise Equipment at SPORTSMITH Some of these units have 9 volt battery found in the back of the console. Also some of these units that do not have the 9 volt battery, still used the same console shell. If you have an empty spot with no wiring in it, then you are fully relying on your external power supply. I am attaching a link to the picture of the back of the console I am referencing. CASE BATTERY DOOR 0K36 01187 0001 SPORTSMITH net

Replacement Parts for Fitness Exercise Equipment at SPORTSMITH Unfortunately, the only way to resolve this issue is to replace the clutch and possible the shaft it rides on.

You can get repair service from www.gympart.com

Check the 6v battery. If you're getting 6v or more, you have a faulty console. Not sure if you want to fix as the console is pretty expensive unless you can get a used one. Try Usedtreadmillrepairparts.com. They sell used parts.

rUN the software calibration for easy diagnostic and fix it. or go under the HOOD motor and follow the steps or read your owner manual. God bless you

I would suggest swapping the consoles to see if the problem follows. If this does not help you figure it out, you are more than likely looking at a wiring issue.

see the video attached. lube the rollers bearing too front+backHowever RuN THE software calibration for easy diagnostic and fix it. see the diagram attached for s.sensor.God bless you

see the video attached. and fix it. God bless you

LUBE THE DECK BELT, ROLLERS BEARING FRONT +BACK SEE THE VIDEO. ATTACHED.GOD BLESS YOU

see the video and lube too the rollers bearing front+back

God bless you