20 Most Recent Schwinn 430 Elliptical Trainer - Page 2 Questions & Answers

HI, Its probably because of the enter switch is not activating. Its contacts gone bad. There will be push switch behind the enter pad that you see from the top. you have to replace this by opening the Console, Display. if you are able to do the same please let me know .Or just remove the Console, Display and take it to the nearest electronic rearing shop. They can do it very easily. and it will not cost a lot too.Ajin

I just fixed the problem on my 430. Somewhere on this forum someone suggested that the dollar size cover on each side of the flywheel cover be removed and the bolt tightened. You will need a socket wrench. It took less than 5 minuted and whamo. Problem solved. Thanks to the individual with that input. Good luck

I have a iron man cdt elliptical that was clunking . I found a shaft on the end of the crank was slipping in and out, inside the bearings. I shimmed it and retightened the retaining washer which prevented it from slipping . Smooth as silk now. It was very frustrating because all seemed tight at first.