NorStar M7310 Corded Phone "headset jack" Questions

...headset jack on the phone, a headset key needs to be programmed on the the phone. You can do this in program mode and make a line key a headset key. Otherwise you must connect it through the handset. ...

headset jack on the phone. If this is what you are using and you don't hear anything then you need to probably need to switch to an M22 amplifier box, which is then plugged into the jack where the

...headset jack under the phone (next to the handset jack). Or you can purchase a headset with an auto lifter for the handset. It picks up the handset enough to answer the call, but transfers the ...

...and the round headset jack on your phone. You will not have remote answer. Push the headset button on your phone and then press the headset button on the CS55 headset. Good luck from Headsets

...for phones w/2.5 mm jack" with my Panasonic KX-T7630 LOOK AT THE FRONT LEFT SIDE OF PHONE. THERE YOU WOULD SEE A JACK THAT FITS HEADSET. I DONT KNOW IF THATS THE SIZE YOU REQUIRE. BUT IT SHOULD

headset RJ-11 Jack. I have a cheap PC-Headset with 2 x 3.5mm jack. Bought a cheap adaptor to RJ11 and it works on Avaya phone only on the handset input. On headset-input speaker works but not the mic.

headset jack... and move the cables if that is the issue. Your problem sounds very familar to your handset being plugged into the wrong jack on the bottom of your phone, and it is more common than you

...to use an amplifier, the M22. Remember that the amplifier needs to be connected through the HANDSET jack not the headset jack. Here is the link for the Plantronics M22. Good luck from Headsets

...headset with volume control that i was using for my old cell phone. Now the jack is 1/4 stereo type plug and the duraband speaker phone plug is 1/8. So i went to Radio Shack and got a plug adopter to ...

...headset mode on sts phone and where do you plug it in? Some phones have jack on the side of the phone. If it does not, you will need a standard telephone headset with amplifier. You will need a ...