...Change the sensor assembly and all will be fine, about $30 from Appliance Factory Parts on line store, about an hour to do, all that is needed is Phillips screw driver to take unit apart. new sensor ...
...sensor assembly Here is something to consider.... changing this part SHOULD fix the dehumidfier. However, if there is a problem on the control board it can give you the impression the sensor assembly ...
...assembly" for your model and change it out. It consists of Temp/humidy sensor in coil, temp sensor in suction return line, and plug harness that goes to float switch. My uni is running like new
controller not working Changed out the burnt out fan and main pc board worked for 2 days now can't turn the power off or adjust anything? Any help1 Maybe sensor assemble needs to be replaced. Check ...
Question about Kenmore Dehumidifiers
...change the % above 01%. I cleaned the filter....no good. I turned it off and then on again and the humidity % briefly showed 55%, unit came on, then a second later turned off and display goes back to ...
...Change the sensor assembly, Part # 6877A30013M from Appliance Factory Parts in Englewood CO, about $30. Easy to change, plugs into control board, remove old temperature probe by pry T-well open with ...
...assembly, it is attached by two long bolts, easy to swap, except the wiring may not be easy. May have to cut the 3 wires and resolder. Get to the motor by removing the back panel and then the fan. ...
...with a different brand. Thanks for the solution, but I already gave up on the problem. I tried changing the main computer box and the sensor assembly, neither of which worked. I scrapped the
...with a paperclip... no change. Believe fault to lie in pwb(pcb) assembly. 6871a20888d which is $43 from sears. Mine is still broken until I decide whether to invest in this circuit board
359 questions posted
Usually answered in minutes!
123 Questions
70 Questions
66 Questions
53 Questions
49 Questions