Acer 22" X223w LCD Monitor "3 cap" Questions

...dell 17'' lcd Model 1704FPTt Purchased s/hand. Replaced 3 caps 1000uf ,10v After about three weeks the same 3 caps failed again. What to check now (thank ...

...cap 470uF or larger and away you go. I did 4 of them in 3 hours. The case snaps apart which is the hardest part. them remove all the screws you can find, unplug the display from the board, remove the ...

...3 weeks. No Problems. Then last night, turned on, came up as usual, worked fine 5 minutes & screen went black. Can see image with flash light & Windows sign-on logo. Took apart & all caps seem fine. ...

my lg flatron w2234s power keeps turning on and off every 20secs or so. power lead is in fine plug and socket all secure what could be the problem It can be bad power supply due to bad caps, see ...

Had the blank screen problem. Now it won't work above 800x600 res I replaced the 3 470 uF caps on the power supply. Did not change the 1000 uF caps. I have hooked up another monitor and I can adjust ...

...3 470uF @ 35V caps from Radio Shack (P/N 272-1030). Luckily, the monitor came right back up and seems to be OK. It was out of warranty, so there wasn't a big risk. Just increasing the working voltage ...

Screen goes dark after 3 seconds. If I power the monitor off and back on, I get 3 more seconds. I am running in Safe mode now but I had to go through the display troubleshooter to get the screen to ...

...- for $25. is there more to it? V From other posts here the repair kit appears to be just the 3 caps and instructions to unsolder the 3 blown caps and replace ( solder back in) the 3 new caps. ...

...3 seconds then very dark Your power supply probably has a blow electrolytic cap on it. You need to pull the power supply board out and have someone replace the electrolytic caps on it. Believe ...

...3/. Locate the 1000uf-25v Cap (i think c806) check the top of the cap, if the top is bubble up then replace it. I replaced my with 1000uf-35V 105 C, use the cap with long leads, solder it to the PCB ...