Bulova Watch "setting four button digital" Questions

...four sides. So basically the writing was similiar to how to work my new watch. The left button to the bottom was for the MODE, the upper left button was for the LIGHT, the upper right button was for ...

...four buttons at the same time. Then to set the time, hold down the set button until the display flashes. You can then use the mode button to cycle through the display features and set them. Use the ...

...setting the time.The Stauer Magnus digital watch, for example, has four buttons: Stop/Start, Reset, Mode and Backlight. Press "Mode" three timesto start the process until the display blinks; "Reset" ...

and find out Hi, press the m button for four seconds todo access setting mode, then change with d button the selection, and increase the number with s button. To exit setting mode press m button again

...four buttons on side and 5 diffrent options on the mode button One button is called the mode button. This will put you in one of the five options. Select the button that indicates time. Pressing and ...

...four buttons push in...no kidding....HOWEVER the button at the five(5) oclock postion...PULLS OUT...this is the key..because this only button, pulls out, i The digital display starts to flash....just ...

...four buttons push in...no kidding....HOWEVER the button at the five(5) oclock postion...PULLS OUT...this is the key..because this only button, pulls out, i The digital display starts to flash....just ...

four months, these 5 steps WORKED. Setting the Timex 1440 Sports WR50MT5G891: This model (WR50M) has four buttons, from left to right, top to bottom: 1) Set; 2) Start/Stop; 3) Mode; and 4) Indiglo. To

four buttons. The lower left button is labeled MODE on the face of the watch. There are four modes and pressing the MODE button will step through each mode until you return to the mode at the start of

...four dial digital watch All you have to do hold the "reset" button for about 10 secs. Then one-by-one the time, date, and seconds will and use the "ST/STP" button to change it. Then, you have ...