...lifter will then allow excessive valve lash and noise.VALVE LASH NOISEIf you can rule out lubrication-related problems as a cause, the next step would be to remove the valve cover(s) and check valve ...
...Valve Lifters. I am not sure if this will solve my problem, please help. Check your timing or could be timing belt out of 1 tooth. This model of corolla does not use lifter. i have a 2002 corolla and ...
...valve or lifter in the engine, or an exhaust leak.Can you make the noise happen by revving up the engine with the car parked ? This type of noise is commonly caused by a defective front ...
Question about Toyota Corolla
...lifter or just valve clearnce adjustment . I don't think the valves are hitting the tops of your pistions if so the engine is junk at this piont . However valve back lash needs to be adjusted 80 to ...
Question about Toyota Corolla
...lifter/valve issue, i am a ford man i don't know if toyota do the same thing, but if they use inserts for the valve seats it is possible a valve seat has been dropping just has not dropped fully out ...
...noise. I took it in to get the oil changed and they told me the valve cover was loose. Is this the problem and can I fix it or should I just take it in and have it done? If your mechanically inclined ...
lifter, valve, or piston. there is a chemical I have used in the past for my old mustang called CD-2. It has been around for many years. give it a try. It pours into your crankcase. Dont let them talk
...lifter etc. If you are talking about the rocker arm assembly that bolts to the head, it is 58 Ft/lbs. If you are talking about the actual rocker arms, you tighten them till they contact the push rod ...
...valve lifter clatter or noise.. then is possible that the oil pressure is ok but that the oil pressure sending unit is bad .. you can have an oil pressure test done to make sure thats ok .. .. the ...
...Valve tapping/ticking noises possible causes ,dirty oil plugging lifter, collapsed lifter, faulty lifter, bent push rod, broken/worn tappet, loose tappet stud, weak/broken valve spring. Check to make ...
554 questions posted
Usually answered in minutes!
1,231 Questions
1,240 Questions
1,236 Questions
819 Questions
767 Questions