1991 Toyota Corolla "crankshaft bearing caps" Questions

I need the torque specs for the main crankshaft bearing for a 1995 toyota carolla 1.8 l engine Main bearing caps are 44 Ft/Lbs final torque Rod bearings are 18 Ft/Lbs and then an additional 1/4 turn.

...bearing cap Timing marks 2000 Toyota Corolla (1ZZ-FE/ 3ZZ-FE/ 4ZZ-FE/ 2ZZ-GE) Set the Crankshaft key in 12 'o Align yellow timing chain mark Clock position (The key aligns on the crankshaft ...

crankshaft bearings.to avoid unneseary replacement of these,you should buy some plasti-gauge from an auto part store remove the bearing caps one at a time and measure the clearance this way.there is a

...crankshaft at the 12 O'Clock position the timing mark on the crank shaft gear shiuld line up with the timing mark on the crankcase at the 1 O'Clock position. For the Camshaft gear, the small hole ...

...bearing replacement kit from kbox.ca. Or, you can just buy a new distributor. Note: To get the distributor back in place you must align the shaft correctly with the notch in the camshaft. There is a ...

crankshaft bearing cap tie plate with engine oil. Install the 4?upper crankshaft bearings?(2) and the crankshaft thrust bearing?(3). Install the crankshaft?(1). Note: The thickness of the sealing bead

...Crankshaft Bearing Cap M8 Bolts 25 N·m 18 lb ft Crankshaft Bearing Cap M10 Bolts - First Pass in Sequence 20 N·m 15 lb ft Crankshaft Bearing Cap M10 Bolts - Final Pass in Sequence 80 degrees ...

...bearing caps and bearings one at a time. Lift the crankshaft out of the block. Remove and discard the crankshaft rear oil seals. Remove and discard the front crankshaft oil seal. INSTALLATION Lightly ...

...bearing cap bolts by 90 degrees. Check that the crankshaft turns smoothly. Connecting rod cap bolts torque: Torque: 24.5 N·m (250 kgf·cm, 18 ft·lbf) Mark the front of the main bearing cap bolt with ...

...Bearing Bolts Crankshaft Damper Bolts Flywheel Bolts Manifold Spark Plugs Oil Pan Drain Plug Intake Exhaust 2008 3.3 H - - - 40 70 - 17 13 20 3.8 P - - - 40 70 - 17 13 20 4.0 X - - - 70 70 - 17 20 20 ...