2003 Land Rover Discovery "blower housing remove" Questions

Ad

to your blower motor? If so you should find the resistor on the motor housing where the blower output is located. It will have wiring plugged into it. When you remove it it should look like a heatsink

Ad

Question about Land Rover Discovery

1 Answer

...housing. Blower Motor Wire Lead Grommet   Push the rubber blower motor wire lead grommet through the opening in the lower air inlet housing. Feed the blower motor wire lead through the ...

Ad

Question about Land Rover Discovery

1 Answer

...housing Blower Motor Wire Lead Grommet Feed the rubber blower motor wire lead grommet through the opening in the lower air inlet housing. Push the blower motor wire lead through the opening in the ...

...housing. Route the blower motor wire lead through the opening in the lower air inlet housing and remove the lower air inlet housing from the vehicle. Position the recirculation-air door as necessary ...

Question about Land Rover Discovery

1 Answer

...housing to blower motor housing screws to 9 inch lbs.(1 Nm). NOTE A new filter housing seal must be used whenever the filter housing is removed to prevent water from leaking into module. Remove the ...

...housing. Blower Motor Wire Lead Grommet   Push the rubber blower motor wire lead grommet through the opening in the lower air inlet housing. Feed the blower motor wire lead through the ...

Question about Land Rover Discovery

2 Answers

...blower housing, five screws from around the housing and remove the blower housing from the unit. Remove three screw attaching the blower to the unit and remove the blower from the vehicle. Remove the ...

housing The blower motor is secured to the housing with three small screws Allow the blower motor assembly to drop downward to clear the instrument panel and remove from vehicle. To install: Place the

...blower housing retaining nuts, pull the blower housing out far enough to unplug the electrical connectors (at the lower right edge, right above the kick panel) and remove the blower assembly housing. ...

Question about Land Rover Discovery

1 Answer

Blower Housing 5 - Electrical Connector (Part of 19805) Disconnect the blower motor housing tube (19A786) at the blower motor . Remove three screws attaching the blower motor to the A/C blower housing

Not finding what you are looking for?
2003 Land Rover Discovery Logo

276 questions posted

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...