1997 Mercury Villager "clean iac valve" Questions

my car shut off alot and has low idle Make sure the air filter is clean, when it has low idle tap on the IAC idle air control valve and see if the idle goes normal.

...clean intake. Low / uneven idle problem can cause by a lot of components. Dirty air filter Dirty injectors + o-rings Vacuum leak at intake manifold and vacuum hose. Bad Idle Air Control Motor (IAC) ...

IAC valve connectors, the throttle position sensor and switch connectors, and the EGR solenoid valve.2Pull the EVAP canister vacuum and purge hoses, the vacuum hoses from the EVAP, the brake cylinder,

Clean the IAC valve seating surfaces on throotle bodyto assure proper sealing of the new O-ring and contact of IAC valve flange. INSTALLATION Lubricate the new O-ring with clean engine oil and install

clean valve on end of iac. also do not push on iac valve, because it will mess up idle of vehicle. just clean the valve on end to remove carbon build up and dirt. you can use brake cleaner or throttle

...clean it. This valve controls the idle speed. After cleaning it turn the ignition on with the engine off. The Iac should move in and out to find the stops. If it does not move you have either bad ...

IAC sensor and clean it with a clean flannel. The electrical failures of the IAC valve may be due to one or both windings of the stepper motor being short-circuited or opened, leaving the IAC valve in

...On the intake manifold, Cleaning your IAC to fix rough idle on 2000 or 2001 Mazda MPV 1999 Ford ranger IAC valve repair Mazda B2300 Idle Air Control Valves How to clean the IAC valve Ford Ranger ...

...Clean IAC valve using carb cleaner Check the parts comprised in IAC system (valve, connector, wiring, solenoid). Use the carb cleaner also to clean throttle body. Check that everything is OK in the ...

...about diagrams and how to clean iac valve, click the link below:--- http://whoisbyme.blogspot.com/2011/10/how-to-clean-idle-air-control-valve-on.html ---------- This should