1999 Dodge Ram "2500 overdrive working" Questions

...2500 manual transmission overdrive. I've purchased a 1997 2500 Dodge diesel with a 5 speed overdrive manual trans. I had the 5th gear, overdrive back off the shaft. It was replace with the new, ...

...2500 with the 5.9 Diesel, it is like the tourqe converter can not find its place. It is a rpm situation as it does this at low speeds or faster speeds, but in 4th gear it starts at around 45 mph and ...

...overdrive running at 55 or 60 the rpm will jump between 1800 and 2500 but runs most of the time at 2500. If i work the gas just wright it will drop to 1800 but will only stay there for a few seconds ...

...2500 at 65-70 MPH. Before when the overdrive was working my RPM's were alot lower at that speed? I had a similar problem with my truck. It eventually go worse and I lost reverse. I had to have the ...

overdrive won't work 97 chevy 2500 2WD, 5.7L, 4L80E. First of all, there is no slippage & no check engine light. All gears shift smooth, except it goes in & out of overdrive, i can stay in ...

...2500 (5.9 DIESEL) ENGINE RPM FLUCTUATES AT 45 MPH TO 55 MPH WHEN IN OVERDRIVE, LIKE IT IS SHIFTING FROM OVERDRIVE TO DRIVE AND THEN BACK TO OVERDRIVE. IT ALSO FLUCTUATES WITH O/D OFF AROUND 35 MPH. I ...

o3 dodge 2500d not shfting to overdrive my 03 ram not shifting to overdrive had the same problem except cruse control wouldn't work either. after checking all the relays and fuses the problem turned ...

dodge ram 3500 won't shift into overdrive. the truck was struck by lightening it on has 2nd and 3rd gear The speedo does not work either it may of fried your powertrain control modual "PCM"

2500 mega cab Diesel 4x4 manual trans. Was on my way home from work (heat index 104) My A/C seemed to be working fine, after about 15-20 min the cold air turned warm. if you are in stop and go traffic

...2500 v10 auto, feels like misfire, when i tried to recover codes it didn't flash anything. The dash overdrive button stopped working when misfire started Overdrive or lockup converter may be having ...