1999 Dodge Ram "throttle body" Questions

throttle body flap? It stcks closed and stalls until it warms up.Thanks, Jon clean the throttle body and flap. with the a tooth brush and throttle body cleaner from the parts store.this should fix the

...throttle body right about where the throttle plate is. you can always pop the air cleaner hose off the throttle body to see abouts where the plate is but it's not really necesscary because it's ...

...Battery & alternaotr seem fine. do you have throttle body cleaner spray dont stand so close when trying to spray down throttle body while trying to start it check if this helps could be ...

...throttle body..slide cable off the stud (carefully)..verify that the transmissionthrottle lever is fully forward (idle) position..and verify that the lever on the throttle body is at curb idle ...

engine If you remove air intake hose at throttle body, and spray WD-40 in throttle body , and it starts, you have a fuel problem. WD-40 works like quick start spray, only a little easier on the engine

...throttle body. With the engine off, trace the gas pedal's linkage (or cable) back to the point where it attaches to the engine (throttle body or carbuerator if not fuel-injected). There will be a ...

throttle body positon sensor is located? I have a 1999 Ram Van 1500 5.2 liter engine. It stalls when i release the throttle. I was told that could be the throttle positioning sensor but I can find it.

...throttle body, but regardless the cure is the same. Your going to need to clean the throttle body and the idle air control valve (IAC). With a can of throttle body cleaner, (follow instruction on the ...

...is not too tight Clean throttle body, change the fuel filter, any codes? you could do some adjustment that last thing. It is set screw at the throttle body. You can put DW40 on cable to throttle

...throttle body or on the fuel injection pump. If it is one of the models on the throttle body it will be attached at the end of the throttle shaft. If the engine is setting code 24 and idles ...