1988 Dodge B250 "shifter linkage located" Questions

Ad

Question about Dodge Ram B250

2 Answers

...linkage from the shifter, you will find it. This part2 people. one is under the vehicle, ready to move the Neutral switch, the other is holding the keyswitch all the way to "start" move the neutral ...

Ad

Question about Dodge Ram B250

2 Answers

shifter linkage before the linkage connects This problem is common to the Mazda Protege, Ford Escort, and Kia Sephia due to the fact that they all share the same manual transmission and common shifter

Ad

linkage from the shifter to the transmission came apart at some point, if you want to look at it yourself jack the front end up, support the van with jack stands then locate the tranmission linkage at

...shifter back and forth. Severe rust, you might have to hit the linkage at the T case. Really severe, use a torch(last option) heat it up. But doing this you will have to replace the sleeve inside the ...

...shifter linkage hanger is located on the drivers side front tranny tunnel (to the left of the 4wd shifter on the floor). This linkage can come loose or gather a bunch of dirt/debris. The only way to ...

Question about Dodge Ram B250

1 Answer

...about the shifter linkage, go to ebay and find yourself a saturn shifter repair kit. this is a common problem, and you can do it yourself if you can get the console out. kit is less than 20

shifter console and inspect for foreign objects in the shift linkage. While inspecting with the key on (not running) keep stepping on the brake pedal to see the action of the cables under the shifter.

...shifter linkage on the transmission,(either under the hood, or under the car) loosen the lock screw/s on the linkage. move the linkage on the transmission either direction.(you should feel the clicks ...

...shifter back & forth while you watch underneath to locate the linkage where it connects to the transmission. You'll see an adjustable joint there where you can loosen something (probably a single ...

...new clutch and pressure plate, replace throwout bearing, put transmission and bell housing back in, connect shifter linkage and clutch cable or hydraulic, put drive shaft back in and you are

Not finding what you are looking for?
Cars & Trucks Logo

79 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2000 Dodge Caravan
2000 Dodge Caravan

2,271 Questions

1999 Dodge Durango
1999 Dodge Durango

2,049 Questions

1999 Dodge Ram
1999 Dodge Ram

1,788 Questions

2000 Dodge Durango
2000 Dodge Durango

1,616 Questions

2005 Dodge Caravan
2005 Dodge Caravan

1,496 Questions

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...