1987 Dodge Ram Wagon B250 "battery" Questions

...to rev up and go back down. When it's done this I've checked the volts off the battery an get a steady 14v. It had a new battery put in about two weeks ago because it would not ...

...Car not starting or turning over indicates towards multiple possibilities. It can be issue with battery or weak battery. But if battery checks out ok, then it can be starter issue or faulty ...

ttery reads 13+ volts, but my starter just clicks my battery reads 13+ volts, but my starter just clicks rapidly and will not turn over Check the starter solenoid.

battery is brand new and terminals clean and engine won't crank engine doesn't crank check your starter motor and its fuse

...the Alternator for a 1988 Dodge Ram B250 The easiest way is to start it up and remove the positive battery cable if the motor dies its your alternator. IMPORTANT RECONNECT THE CABLE WITH THE MOTOR ...

I am trying to locate the fusible links on a 1988 dodge B250 van can anybody help me? Fusible link location Usually, they are connected to the positive battery cable, or the starter.

location main fusible link 87 dodge 250 Fusible links are normally located in a second, smaller wire attached to the positive terminal of your battery.

...sound, nothing. If i hold the key in the start position or turn it a few times then it will start. Battery is fine, Altinator, belt & pulley have already been replaced about 6 months ago. check ...

...control module, but i can't locate the ******. any other thoughts? have checked distributer, plugs, battery... really looking for location of ignition control module. It should be underhood, driver ...