Northstar or 350 V8 option ;-] The point is, with a fiero, any engine can go in, just amounts to hours and dollars... if its low octane gas use high test. if its a rod knock and still runs you my need
NORTHSTAR) cadillac. Fig. Cylinder head torque sequence-4.5L and 4.9L engines (not Nothstar, this is 4.6L) Tighten cylinder head bolts, in sequence, to 38 ft. lbs. (50 Nm). Tighten cylinder head bolts
where is #8 cylinder on a 2004 Cadillac SRX v8 Northstar back cylinder on the passenger side of engine
...northstar cylinder 7 isnt firing and already put new sparkplugs in and still isnt firing.whats next iginition coil needs to be replaced. By for about 150 to 200, and take the Northstar cover off and ...
Question about Pontiac Fiero
...Northstar V8 VIN Code 9 or Y is a 4.6L engine. The cylinders are arranged in 2 banks of 4 with a 90 degrees included angle. The left (front) bank of cylinders are number 2-4-6-8 and the right (rear) ...
Question about Cadillac Cars & Trucks
What is the cylinder order for a 2008 Cadillac STS V8 4.6L Northstar engine 18436572
...Northstar V8. It was leaking coolant into a cylinder. I took it in and the shop ran Blue Devil through it. I am no longer leaking coolant, however, my temp guage fluctuates with some overheating. It ...
...cylinder head on a 1993-1999 4.0L or 4.6L Northstar V8 to replace a gasket or do a valve job, do not reuse the old 11mm head bolts. Also, GM has revised the head bolt torque values and tightening ...
...northstar v8, 32 valve. There is a flat spot at the front of the right side (passenger side) cylinder head will have the last 6 of the Vin and letter code at the end of it for id purposes. You will ...
...cylinder heads of, along with exhaust manifold, intake manifold and a bunch of other stuff to actually get to it. Hope this guided you in the right direction! Have a good one! Your head gasket are up ...
125 questions posted
Usually answered in minutes!
159 Questions
85 Questions
62 Questions
65 Questions