2004 GMC Envoy "removing power door lock actuator" Questions

Ad

...Power Door Lock, Front Removal Remove the front door latch. For additional information, refer to Latch?Front Door . Remove the power door lock actuator from the front door latch. Release the locking ...

Ad

Question about GMC Envoy

1 Answer

power door lock actuator electrical connector. Drill out the power door lock actuator rivet. Remove and discard the screws. Remove the power door lock actuator. Disconnect the power door lock actuator

Ad

...power locks then the door lock actuator may be bad, the door panel will need to be removed and test for power at actuator. While inside the door check lock linkage.If the door lock lever wont move ...

Question about GMC Envoy

1 Answer

...the power door lock actuator. 4.Disconnect the electrical connector. 5.Drill out the rivet. 6.Disconnect the actuator rod. 7.Remove the actuator. ------------------------------------ Attached ...

Question about GMC Envoy

1 Answer

power door lock actuator for the driver's door. E30 Models Remove the door panel and the water shield. Disconnect the wiring from the actuator. Remove the screws and pull the actuator off the linkage.

...Power Door Locks - Removal & Installation Door Lock Switch Door Lock Diagnosis & Testing Visually inspect the following: Misaligned door(s), hood or luggage compartment lid Door latches ...

...Power door lock actuator (218A42). GO to Pinpoint Test A . PINPOINT TEST A: THE DOOR LOCK IS INOPERATIVE CONDITIONS DETAILS/RESULTS/ACTIONS A1 CHECK THE OPERATION OF THE SUSPECT DOOR LOCK Check for ...

...door is with a key any suggestions remove the door panel and see if theres power to the power lock actuator is so the actuator is bad if not power locks remove the door panel and check the linkage ...

...door power lock actuator You will need to remove the door panel, mounted inside the door you will find the lock actuator, it should have a rod connecting attached to the lock cylinder, also there ...

door panel and check for power and ground at the lock actuator and if its getting power on one wire and ground on the other then actuator is bad, power and ground switch bettween wires depending on if

Not finding what you are looking for?
2004 GMC Envoy Logo

3,345 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

2003 GMC Envoy
2003 GMC Envoy

1,368 Questions

2002 GMC Envoy
2002 GMC Envoy

1,418 Questions

2006 GMC Envoy
2006 GMC Envoy

593 Questions

2005 GMC Envoy
2005 GMC Envoy

540 Questions

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...