2004 GMC Canyon "2" Questions

...control inputs can be: ?€¢ Sensors and switches that are directly connected to the BCM ?€¢ Class 2 serial data received from other control modules connected to the class 2 serial data link. The

blower fan will not work on # 2 position At first, the blower stopped working on # 3 and worked on 1,2 & 4. Then I went and changed the resistor and now the blower does not work on # 2 but works ...

...light bulb? to replace the GM tail light bulb, you will drop down the tail gate and you will notice 2 screws on the tail light assembly, you will remove those 2 screws with the proper screw driver, ...

what is the firing order on 2004 canyon 1-3-4-2 (2.9L) 1-3-5-4-2 (3.7L)

Why does my GMC Canyon 2008 Blower fan only works on 2? Blower fan only works on 2? I had a problem on my 2006 sierra, the fan wouldn't work on 5. gm had a curtisy recall, they had to replace a ...

2005 Canyon 5 cyl 4x4 is not working I have a 2005 Canyon 5 cyl 4x4 is not working properly, when I pushing the 4x4 bottom I hear the click in the transmission area but its still not working. any ...

best way remove front hub from spindle 05 colorado 2 wd rusted i can get all the bolts and hardware (pads ,hanger caliper ect) off the hub but can not get the hub free from the spindle. i need replace

...light Illuminated with a message center or an indicator that displays Reduced Engine Power. DTC P2138 - Accelerator Pedal Position (APP) Sensor 1-2 Correlation may be set. The voltage difference ...

have 2006 gmc canyon having trouble with it staying on.3.5 engine starts up,stays on a few seconds then shuts off shows reduced power on panel.won't crank over .have to wait a few minutes then it ...

I have a 2009 GMC Canyon 43,000 miles. Check engine light came on 2 weeks ago. I have a 2009 GMC Canyon with just over 43,000 miles. The check engine light came on about 2 weeks ago. I had it checked ...