Question about Kenmore Dryers
...Inlet Thermistor (Temp Sensor) Fail Check or Repair Needed = The controller indicates an electrical shorted inlet temperature sensor (thermistor). Remove power from the dryer. Use a multi-meter and ...
...INLET THERMISTOR is shorted or the INLET THERMISTOR circuit is shorted. If you replaced the inlet thermistor and control board then it may have bad inlet thermistor circuit. You should disconnect the ...
inlet thermistor then to blower motor is not getting up to speed. However when I let it sit overnight and ran it this morning had heat and ran which makes me think it is the inlet thermistor. My model
inlet thermistor open f24 Dryer is a Kenmore Elite Oasis. In diagnostics F24 is displaying which states that the inlet thermistor is open. Is this possibly a loose wire or definitely a short? Do I ...
Question about Whirlpool Dryers
Inlet Thermistor Open F-24 flashes if the inlet thermistor is open. How do I close it? This is a whirlpool cabrio electric dryer. Replace the thermistor to restore normal operation. It opens when ...
...on duet dryer The control board senses the inlet thermistor shorted. The inlet thermistor is a part of the hi-limit thermostat which is located on the heating element box. Here is the part to
...inlet thermistor shorted. The inlet thermistor is a part of the hi-limit thermostat which is located on the heating element box. - The hi-limit thermostat kit Part number: AP3094323 Read more: ...
...and screw the new thermistor in place then transfer the wires from the old thermistor. If your dryer has the inlet thermistor that needs to be replaced, do the same as the outlet thermistor
Question about Dryers
...mean Inlet temperature sensor (thermistor). Could be a failed thermistor, but thoroughly check the entire dryer exhaust for blockage (severe lint build up) inside dryer all the way to exterior
350 questions posted
Usually answered in minutes!
1,123 Questions
940 Questions
790 Questions
215 Questions