Frigidaire Affinity 5.8 Cu. Ft. Electric Dryer "reset error codes front" Questions

...error code on the washer and tried some of the things discussed on the Applianceblog.com site for simiilar duet washers and found a link to this site ... if its a Kenmore model then this message says ...

...see if it resets. most electrolux have E error codes followed by 2 numbers. Press and hold the "Temperature" and "Dryness" buttons simultaneously for 6 seconds to do a factory reset. hope this

...the error code 'P:AU'. What is that code? What is the fix? Is it the controller board? Check you circuit breaker. Even if it doesn't look tripped reset it anyhow. This is a power interrupt

...front load dryer Error code f 26 flashing on Kenmore He2 front load dryer. Please advice door switch error...implies the door is ajar..or that the switch is not working. HELLO; Please try to unplug ...

...error code and how to troubleshoot it. If the control panel is not responding to touch, it is possible that there is a problem with the control panel itself or with the control board that powers it. ...

...error code f01 which as been telling me nothing but it could be a power surge and I have tried everything. What can I do now? Is there another option for this issue or is there a way I can hard reset ...

...reset the factory settings to troubleshoot BEFORE scheduling service? It is still covered for service. Hi! ricksmith What is the first three digits of the model number. The he4t I have reference to ...

...exact problem. In the meantime, you can reset your dryer by either unplugging your dryer or flipping off the breaker for roughly ten minutes. This often clears most false error codes. Hope this

...error code normally indicates that control board may need to be replaced or a stuck relay on the control panel. you can reset the unit by unplugging the dryer power cord for 5 minutes and then ...

...reset a F 01 error F01 indicates a failed electronic control board. You may be able to clear this code by unplugging the washer for 5 minutes. If the code returns after plugging, then the electronic ...