Polaroid TLA-01911C TV "set input remote" Questions

...Input Select", and then press ENTER. 3.Press a/b button (on remote) to select the signal type you want to set, and then press ENTER. 4.Press MENU to exit. just try these. need further help feel free ...

...adjust the input list if you need to, and set the commands that you tested to the appropriate inuputs. 5. Update the remote and test your Activities. Hope that helps you get yout Harmony

...input on the set, remote works again. Did a hard reset, but problem remains. What board is this related to? Thanx in advance. I have the exact same problem, let me know what you find. This the 1st ...

...set on AV1, push the input button and try to change the input using the up and down arrows. You want to set it on cable or whatever your TV input normally says. I have Satellite TV and mine says ...

...input using the buttons on the tv but it says in order to lock it in press enter.. but there is no enter button on the tv. Maybe a factory reset will put it back to just tv inputs snd if so how do i ...

...set has a control on it for selecting the video input(s). If not, then you are screwed because universal remotes do not usually have input selection buttons. Either purchase another remote or a ...

...set? If you mean changing the input source to AV, it depends on the brand and model. Some units have an Input or Source button on the front panel (or side panel) of the TV and on the original remote. ...

...set the TV on a specific channel depending on the box (Ch3, 4, 60 (Dish Network)) Thus you need to change the input and then the channel if needed. If you have a tv that uses the input button on the ...

...input selector buttons at its front panel controls. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 ...

...INPUT button on the TV set or remote control to display the input source menu, and use CH+/- button on the TV set or / button on remote control to select the input source, press ENTER button on the ...