Question about Xerox Office Equipment & Supplies
error code 009-349 key to reset from what I found here Thread workcentre 7345 error code 009 349 It looks as if you will need a technician to service it
010-349, can you help me, please.¿ ERROR 010-349, can you help me, please.¿ Change the Fuser Unit.
Question about Xerox Office Equipment & Supplies
...error: 010-349 That is a fuser error. Open the rear door. Remove and reseat the fuser. If this does not work, you will need a new fuser. If not that specific error, just let us know. Hope this
How to solve "reboot printer (010-349)error in OKI B6300 printer This is a fuser disconnection error. Try to remove the fuser and put it back securing properly in its place.
...349 key to reset There's no reset for that error, the error indicates that the 1st BTR did not reach the retract position. Try clean the 1st BTR Retract Sensor and look for damage. Also check the ...
Error 349 and error 388 on fax HP 6210 how to corekt?? Press the setup button on the front panel of your printer and go to fax setup Under that you will see ECM - it must be On Turn it off - and then ...
...ERROR MESSAGE "REBOOT PRINTER 010-349"... You must call a service. The heating-element (fuser) has to be changed. Hi Gruener, Are you suggestion that I take out the black defuser box in the back of ...
...error code 9-349 any ideas? Some times that is cause by the Ibt belt. The printer has detected that the 1st BTR rollers in the accumulator belt did not reach the contact position. The ibt belt part # ...
257 questions posted
Usually answered in minutes!
534 Questions
436 Questions
284 Questions
267 Questions
262 Questions