Nikon D40 Digital Camera with G-II 18-55mm Lens "keep saying lens obstructed" Questions

saying lens not attached I would help to know the error message, but here is what I can tell you. Having a "Lens error " message display on the camera's LCD display indicates a problem with the camera

...saying lens obstructed remove lens cap. there is no cap! It seems that many people think that sending a camera back to the manufacturer is  helpful. Most of us want help to fix it ...

lens pointing down and tap the back of the camera firmly a couple of times... keep the camera in this postion and switch the camera ON and OFF a couple of times to try and loosen any foreign particles

...please check there is no mechanical obstruction on the lens. Then switch on again. When the error keeps coming back you should ask advice to a Nikon certified crevice centre close to

...saying lens obstructed Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the ...

saying there is a lens error. I need a solution to fix my problem. Hey lexus470, A common cause of this error message is that something is obstructing the movement of the lens (i.e. sand in the lens).

...lens when you power on the camera. Even the slightest bit of obstruction seems to make the problem reoccur. Also, sometimes you may have to try several times until you finally heard the click, so ...

when i turn my coolpix on the lens keeps zoomin in and out then says lens error The lens error is due to failure of the lens control system which is within the main controller . You can remove battery

...lens when you power on the camera. Even the slightest bit of obstruction seems to make the problem reoccur. Another note. I had tried this several times until I finally heard the click, so please ...

...saying lens obstructed and the lens won't go down There is a tiny motor that extends and retracts the lens, sometimes it will jam because part of the gear breaks causing it to malfunction, I would ...