The waste ink absorbers on this machine are under the print engine and cover the entire bottom of the printer. You have to have access to the diagnostic program on the printer to reset the error codes
...ink counter: Press Menu-Scan-Copy-Scan to enter service menu. Use arrow keys to scroll to "Service menu counter access". Press OK. Use arrow keys to scroll to "ABS-M DOT COUNT" Press Copy. Use arrow ...
Question about Canon PIXMA Office Equipment & Supplies
...ink. Access the printer to get these two absorber pads and clean it with soap and running water. After cleaning return it back. To access the printer, first open the top cover for the ink cartridge. ...
Question about Canon PIXMA Office Equipment & Supplies
...ink that already left the cartridge, but didn't end on the paper. The print heads are cleaned after every line. What you could do is open te printer and try to get access to the section below the ...
...ink. 4) Rinse the absorber in a metal sink (porcelain can stain) with more alcohol, then leave it to dry. 5) Replace and make sure the absorber is seated the same as when you took it out. Then you ...
Question about Canon PIXMA Office Equipment & Supplies
...access the ink absorber tray there is an absorbing pad there take it out from the printer and washed it with a detergent soap let it dry before installing it agin the pads are place on the right side ...
...ink. Access the printer to get these two absorber pads and clean it with soap and running water. After cleaning return it back. To access the printer, first open the top cover for the ink cartridge. ...
Question about Canon PIXMA Office Equipment & Supplies
...ink absorber for this machine is on the bottom, the whole case is covered at the bottom with absorbent pads. The pads are cheap, but you need to access diagnostics to be able to reset the error code ...
...access to the machine to replace the excess ink absorber. The picture points to front left of machine but unable to find easy access to change part. can I change the part and replace it. The ink ...
Question about Canon PIXMA Office Equipment & Supplies
...ink tank. In any case, you can try the following to clear upo the error, but eventually you'll need the waste tank to be emptied or replaced. Turn on your MP130. 1) After that press: Menu - Scan - ...
2,715 questions posted
Usually answered in minutes!
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
1,216 Questions