Whirlpool Duet GHW9150P Front Load Washer "washing machine drum hitting side" Questions

...washing cycle - improves with spin especially as speed increases. Your drum is out of line and to check is to remove your rubber front gasket and see whether the drum have more space and any of it's ...

drum hitting something or belt slipping. There are no error codes or smell of burning belt. HELP!! the drum bearings are shot,you need to get them replaced,if the drum is actually hitting the sides if

...washing machine is reving up to spin and dying down from a spin (suspension problems are also often worse at this stafe too). It's not normally a metalic sound though. If the noise is coming from the ...

...drum that does not spin smoothly. dc, drop the front bottom panel and make sure the 4 shocks are connected to the tub and bottom panel, then check the front and rear counterweights. They may have ...

...machine back to create more space between the front on the door and the outer drum. Remove the screws for the kickplate and remove the kickplate for easier access. Open the door and remove the spring ...

...hitting the side every turn and sometimes, not always, spills the water to the floor. if you can open the door,grab the inner basket at 9 and 3 o'clock and see if you can move it sideways,then ...

machine is 2 weeks old. From the time it arrived it has an audible knocking sound which is only produced as the drum spins in the spin cycle. The freqency of the knock is directly tied to how fast the

...drum - I'll update later if it does not. If the washer is intermittently allowing water to fill into the tub when not in use, you may have a fill valve that is leaking by. Sometimes when the water ...

...washing machine bearings that just "drop out" at the back, in my experience the whole inner and outer drum have to be removed to get to the bearings, this is because there are two sets of bearings, ...

...drum seems like it hits side, I hopened the back, shock absorbers and springs look ok Hi, You need to take the shock off one of the pins and check to see if it is hard to move it in and out... if it ...