Question about Whirlpool duet Washing Machines
...unlock and would run 1 load. Now, the only thing working is the flashing control lock button. Here's what the Duet tech sheet says to do:1. Press PAUSE/CANCEL button on the touch-pad twice.2. ...
...won't turn on. Control lock light is on and fast flashes five times if any buttons or knobs used. Worked fine before move Press and hold the lock button for 3 seconds - should unlock the control ...
Question about Whirlpool duet Washing Machines
...lock or unlock the controls. NOTE: These instructions may also work for newer model Maytag, Hotpoint, Admiral and Fridgidaire model front loaders as well. Refer to your owner's manual or front panel ...
...lock hold for 3 secs) and the controls will unlock, its a child safety feature I have the front load Whirlpool Duet washing machine and when I load it and press the start button, I hear the door lock ...
Question about Whirlpool duet Washing Machines
...lock or unlock the controls. NOTE: These instructions may also work for newer model Maytag, Hotpoint, Admiral and Fridgidaire model front loaders as well. Refer to your owner's manual or front panel ...
...lock and unlock; it is the same procedure. Check your washer plug to see if the connections are tightly screwed. You can also plug off for half an hour to reset. How abt a nice rating for the free ...
Question about Whirlpool duet Washing Machines
...button. The timer numbers flash and you have to push on the door to get it to lock and hold the door ******* to 30 sec. after it starts or the door unlocks and the timer numbers flash. It never shows ...
Question about Whirlpool duet Washing Machines
unlock control or pause/stop, powered off & on...short buzz noise then back to same mode. ck to see if any water in drum if so possible pump clogged ..remove bottom panel pump will have clean out port
...unlock (depending on your model) If it is a key you see, it is the child lock. Bottom right hand corner, end of cycle button, hold it for 3 seconds; machine will fix itself. This is the 'child lock ...
button for 3+ seconds to unlock. I guess it's a "feature". On the right side of the machine, it says end of cycle just press it for 3 seconds! I tried the end of cycle button and it WORKED!! Thank you
11,378 questions posted
Usually answered in minutes!
187 Questions
64 Questions
34 Questions