Question about Xante Office Equipment & Supplies
Error 50, 51 Turn the printer off, then on. Error 52 Remove the Duplex Unit (if installed). Check for paper under the Upper Tray. Turn power off, then on. Error 53 Open left door and remove any jammed
error detected. Turn off the printer. Wait at least 5 seconds and then turn it back on. If the error message still appears, write down the error number listed on the LCD panel (xyyyy) and turn off the
...error. Turn off the printer, and then turn it on again. If the same error occurs, turn off the printer, then contact the store you purchased the printer, or a service representative. When contacting ...
Question about Xante Office Equipment & Supplies
error. Turned off machine still doesn't work. Turn off machine disconnected power and removed fuser for 20 minutes then reinstalled and turned on an still the same error appears. wheb i give the print
Scanner 5 error - turn off / turn on Scanner 8 error - turn off / turn on Scanner 2 error - turn off / turn on The laser assembly or main board might have an issue.
...Error Turn off then onError message50.2 Fuser Error Turn off then onDescription50.2 Slow fuser error. The device has experienced an internal hardware error.ActionTurn off the device, wait at least 25 ...
Question about Xante Office Equipment & Supplies
...error. Turn off the printer, and then turn it back on again after a moment. If the same error occurs, turn off the printer, then contact the store where you purchased th Error Code: E100 0000 Printer ...
...turn Off then On 49.XXXXX ERROR alternates with To continue turn Off then On Explanation A critical firmware error has occurred. Recommended action Turn the printer Off and then On. If the message ...
169 questions posted
Usually answered in minutes!
44 Questions
32 Questions
41 Questions
17 Questions
15 Questions