Hotpoint 24 in. FDW60 Free-standing Dishwasher "fix pcb control" Questions

Ad

... (quote.., its a fault in the control panel and all he did to fix it was unplug it from the pcb board ( its the third plug starting from the left ) and it reset itself. Samsung Model DMT800 Blinking ...

Ad

Question about Zanussi Dishwashers

2 Answers

...fix the problem indefinately but looking at the PCB the track which burnt out is just the 240V live and switched live from the relay, therefore replacing the track (solder some wire where the track ...

Ad

Question about Fisher Dishwashers

2 Answers

...the rear power board (tested with multimeter). I am puzzled as I have the service manual and have fixed these unreliable machines a few times already. Any idea's? Thanks in Advance Hi,

Question about Dishwashers

1 Answer

...PCB which made no difference except now have no error code. Circ pump, inlet valve, heater, drain pump checked independantly all worked. I f you have warranty on this please call them, you have a ...

...fix the problem. 1. The relay/tracks in question are beside the two separate connectors at one side of the PCB close to the big 12V relay (it should be obvious as there should be scorch marks) 2. If ...

Question about Hotpoint Dishwashers

1 Answer

...main control board. As it's soldered directly onto the control board I would suggest replacing the whole control pcb for anyone with this fault unless you can find any spec details for the

Question about Dishwashers

1 Answer

...is old, you might want to consider replacing it. It's possible to get a replacement relay (dead cheap) and solder it onto the PCB, but I don't recommend this as a DIY fix. Hope this helps. ...

Question about Electrolux Dishwashers

18 Answers

...PCB. See attached picture You guys are blo....dy brilliant. I have put 2x heater elements into my DX302. The first time I think I got lucky - having the circuit board on the door probably banged the ...

PCB can be difficult and if your dishwasher control board has become faulty you will need to replace it. Hope this helps and good luck. Best, Dave, Just Fixed (https://www.justfixed.co.uk/help-advice/

...PCB board. Below that are closeups of the PCB where it appears to corrosion of some sort. Does anyone have any idea what it is and how this could make the board fail ? Or is there any way to fix

Not finding what you are looking for?
Hotpoint 24 in. FDW60 Free-standing Dishwasher Logo

573 questions posted

Ask a Question

Usually answered in minutes!

Top Hotpoint Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Brad Brown

Level 3 Expert

19187 Answers

Paul Carew

Level 3 Expert

3808 Answers

Are you a Hotpoint Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...