HP LaserJet 4 plus Printer "rs 232 port" Questions

...RS-232 Serial Connection or DB-25 RS-232 Serial Connection If it has 25-pin connector: use the following: DB-25 Serial Connection or DB-25 RS-232 Serial Connection If you are configuring the computer ...

...RS-232 serial, 9600 baud) RS232-19.2K (RS-232 serial, 19200 baud) RS232-38.4K (RS-232 serial, 38400 baud) RS232-115K (RS-232 serial, 115000 baud) RS422-9600 (RS-422 serial, 9600 baud) RS422-19.2 ...

...IS THE PORT CONNECTIONS THE SAME ON BOTH OF THESE MACHINES. I HAVE A 320 AND WOULD LIKE TO MOVE UP TO A 420 IF MY CARDS WILL WORK. THANKS IN ADVANCE. GENE yes the RS-232 Serial card is the ...

...RS-232. Is there a setup I need to do or something? To setup connection first find serial settings by: Hold feed button whilst switching on label, will then print configuration and do a calibrate. ...

...rs-232) interface and your baud parameters on the printer and the computer are mis-matched. Print a test page by turning off the printer, holding the feed button down WHILE re-powering the printer. ...

...RS 232 to a 9 Pin and I have tried a 25 pin.. Same result, Not available. I Downloaded Epson OPOS ADK. Set the ports up properly, NOTTA.. Make sure to install the ADVANCED drivers from Epson. I have ...

...Keyboard Wedge - no drivers needed , USB and RS-232 drivers are needed for windows and your software must support this type. here is a site I googled with drivers ...

...RS-232 SERIAL interface using a DB-25 connector . You'll need a USB to SERIAL converter, not parallel. Be sure that the baud rate and data/stop bits are set the same on the printer and interface ...

RS-232 port. For a parallel port connection, you would need one that is designed for scanners and bi-directional communication (USB to parallel adapters are available to connect this to a new computer

...RS-232 converter is. It's a semi-opaque bluish green molded plastic with white semi-opaque plastic thumb screws, if that helps. The printer prints labels on Heat Shrink fine, just one at a ...