Brother MFC 9700 All-In-One Laser Printer "clean drum error fax machine" Questions

drum package and clean the metallic cylinders on the left and right side of the toner/drum unit, then reinsert package into machine. * Bad toner and/or drum unit. Replace should solve it. * Mechanical

...Drum errors, subsequently, it doesn't allow me to print or copy...I hope its allowing my faxes to go through, as there is no confirmation printed. I have used canned air to clean the inside of the ...

drum. Do you clean corona wire of drum? Take drum out of machine, clean corona wire by gently sliding the blue tab from right to left several times; then, return the blue tab and snap it into the home

...drum (be sure it clicks into place). f. Clean the primary corona wire inside the drum unit by gently sliding the blue tab on the top of the cartridge from right to left several times. Return the blue ...

...clean the dp unit.. carefully take out the drum unit & check if the inner clips touch the drum.. this can be done by checking the continuity of the drum with a mulitmeter.. if there is no continuity ...

...ERROR CODE E079 AND SUBCODE 0000 THANKS. Have you tried to reset? maybe you can reset first meanwhile I will be looking for further solution Hiya! Not a lot of information on the codes for that fax, ...

clean destroyed the sensor. NEVER USE A VACUUM to remove old toner. Worse case the main board that the sensor feeds is bad. Also when (if the drum and developer where replace did that person clear the

...error messages in display, using normal copy paper, also print border if printing from network. This maybe your cleaning blade, your drum or the fuser unit....the best way to find out is to make a ...

...error. I cleaned what I could (vacuumed) and replaced the Photoconductor Unit (PCU). I thought that fixed it, but the problem returned after just a few copies. Sounds like a charge problem, check the ...

...error CF032 Might want to have the developer replaced and drum/cleaning blade normally done all together, then run the F8 procedure and make sure the counters are cleared Did you recently replace the ...