...Bank 2 Sensor 2 P0161 HO2S Heater Performance Bank 2 Sensor 2 P0162 HO2S Circuit Bank 2 Sensor 3 P0163 HO2S Circuit Bank 2 Sensor 3 Low Voltage P0164 HO2S Circuit Bank 2 Sensor 3 High Voltage ...
...Voltage (Bank I Sensor I) P0132 02 Sensor Circuit High Voltage (Bank I Sensor 1) P0133 02 Sensor Circuit Slow Response (Bank 1 Sensor 1) P0134 02 Sensor Circuit No Activity Detected (Bank I Sensor 1) ...
Voltage Bank 1 Sensor 1 P0032 - Heated Oxygen Sensor (HO2S) Heater Circuit High Voltage Bank 1 Sensor 1 P0036 - Heated Oxygen Sensor (HO2S) Heater Control Circuit Bank 1 Sensor 2 P0037 - Heated Oxygen
...voltage at sensor connector between terminals "sensor ground" and "5v supply" with the ignition ON and engine off, voltage should be 4.5-5.0 volts. Test the MAP sensor ground circuit at the "sensor ...
Question about GMC Cars & Trucks
...Voltage Bank 1 Sensor 1 DTC P0132 HO2S Circuit High Voltage Bank 1 Sensor 1 DTC P0133 HO2S Slow Response Bank 1 Sensor 1 DTC P0134 HO2S Circuit Insufficient Activity Bank 1 Sensor 1 DTC P0135 HO2S ...
...sensor: a voltage signal from computer to sensor, a ground wire, and the signal back to computer from sensor, should measure 4 volts, no vacuum, and 0.5 volts with 25 inches of vacuum applied. What ...
Sensor Voltage High C-8 P0100 Mass Air Flow Sensor Voltage Low C-8 P0110 Intake Air Temperature Voltage High C-10 P0110 Intake Air Temperature Voltage Low C-10 P0115 Coolant Temperature Voltage High C
...voltage drop across the sensor terminals and provides electrical signals to the PCM corresponding to temperature. Thermistor-type sensors are considered passive sensors. A passive sensor is connected ...
...sensor voltage is approximately 0.5 volts with the engine not running (at sea level). Record MAP sensor voltage with the key ON and engine off. Start the vehicle. Verify that the sensor voltage is ...
51 questions posted
Usually answered in minutes!
134 Questions
54 Questions
31 Questions
8 Questions
4 Questions
