2011 Lexus RX 350 "remove radio panel" Questions

...REMOVE RADIO RECEIVER ASSEMBLY (a) for Integrated with Panel: (1) Disconnect the hazard warning signal switch connector. (2) Remove the 4 bolts. (3) Disengage the 4 clips and the 4 claws and remove ...

...Remove the radio chassis. Insert Radio Removing Tool into the radio face plate and release the radio retaining clips. Pull outward on Radio Removing Tool to remove the radio chassis from the ...

...remove the radio panel. Pry the lower part of the radio panel away first, then separate and remove the panel. Using a plastic trim tool, carefully pry the radio trim panel away Remove the center trim ...

...Remove screws holding radio to instrument panel. Pull radio rearward to gain access to the back of radio (RADIO). CAUTION: Pulling the antenna cable straight out of the radio without pulling on the ...

...Remove the radio. Disconnect the electrical connectors. Disconnect the antenna cable. Remove the radio. Remove the instrument cluster finish panel bolts. Remove the instrument cluster finish panel ...

...radio. Remove the upper and lower screws from both sides of the radio brackets Remove the radio from the dash until the wiring connectors are exposed. Extract the radio with brackets and ashtray out ...

Remove the radio. Disconnect the electrical connectors. Disconnect the antenna cable. Remove the radio. Remove the instrument panel finish panel bolts. Remove the instrument cluster finish panel bolts

remove radio complete instruction on removing radio Remove any media that may be in the radio. Put your car in park, set the parking brake and remove the negative battery cable (the black cable) from ...

...the ashtray. Remove the instrument panel center trim bezel and radio face plate. Remove the screw from the back of the radio receiver and the screws from the front face of the radio. Remove the

...remove the radio, insert the removal tool prongs into the release clip access holes (arrows) Push in approximately 1 inch (25.4mm) to release the retainer clips, then pull straight out to remove 3. ...