NEC VT460 Multimedia Projector "status lights blinks" Questions

Status light blinking Status light to repeat blinking 2 times 0.5 second of intervall and off 2.5 second of interval Sometimes the fan overheats. Pull the power plug out of the back for about 15 - 20 ...

...status light first blinks green a few times, then a beep beep beep is heard and the status indicator starts blinking red, 5 cycle: the manual says lamp failure, "wait a full minute and restart" , I ...

Power and status lights seem to be blinking a code that is not in the manual. status light blinks 4 green to 1 red, while the power light blinks 1 green to 1 red. Lamp cover?

Status light blinks red bulb replaced only 2 months ago Status light blinks red bulb replaced only two months ago? when i turn the power off and on the status light goes green for about 30 secs then ...

...blinks and the status light is off, check the lamp door. if the power light blinks and the status light is steady red or blinking green, you have a power supply/ballast issue. you may have to send it ...

Status indicator blinks RED, not starting. On power-on, the usual start-up delay, the the Status indicator blinks RED, and the Power indicator stays ORANGE; and Projector does not start! There are ...

status lamp blinking orange 6 times PROJECTOR. NEC VT491 THE STATUS LIGHT IS BLINKING 6 TIMES RED, AND THE POWER LIGHT IS ORANGE

status light is blinking and lamp won't come on... Status light is blinking and lamp won't come on Test

status light blinks seven times Won't power on. Just changed the bulb (MT60LP). No sounds of powering on either. Red status light just blinks seven times, pauses, then blinks seven times, etc. ...

What would cause the status light to blink and the projector not turn on. NEC-NP50 NEC NP50 will not power on. The status lite keeps blinking. What would cause this to happen. Could be a bad power ...