Kenneth Cole KC1104 Wrist Watch "chronograph flashing" Questions

flashing.5. Press C to advance digit; press and hold C for fast advance.6. Press D to set hour and minutes.7. Setting will automatically exit setting mode mode after minutes are set.Chronograph Mode1.

Chronograph, the digital display shows EOL and date flashing; just replaced the battery but it still flashes; have tried pulling crown out and pushing both buttons but that did not work You should not

...: Alarm Bell will be off. Release S1-Button and Display changes to normal time immediately. CHRONOGRAPH MODE : In normal time, Push S3-Button, chronograph Function will be set. Start/Stop : ...

...chronograph to "0". Return to time-telling mode by pressing the "B" button. Setting an AlarmTo set an alarm on your Armitron digital watch, press the "B" button twice to access the alarm mode. Press ...

chronograph mode>
tap S1 to start>
tap S2 to lap time>tap S2 read time>tap S1 to stop>tap S3 to exit tap S1 to stop
tap S2 to reset>tap S1 to start ...then begin againChime of every hour ON

flashing digital display When the digital view is on the digital display is flashing but the low battery letters do not appear. Does this also indicate a low battery or is there another problem? I ...

The range difference between Time 1 and Time 2 is 23 hours.CHRONO MODE1. Press C to start and stop chronograph.2. Press D to Split/Reset the chronograph.3. Press A to recall the memory if Chronograph

...chronograph wristwatch with no instructions... how do I set time, day & date, & alarm on it. Manufacturer # shp3242 Instructions for Sharp Alarm Chrono (Digital) Push "Mode" button until the mode is ...

What does the flashing EOL mean? EOL is short for End of Life. Don't worry. According to TAG, that just means you need to replace in the internal lithium battery.

Tag kirium has the eol flashing error even after a new battery was installed Don't assume the battery you installed is good. Check it or replace with another.