KitchenAid KSM150PS Artisan Series Stand Mixer "beater hits side" Questions

Beater hits side of bowl I have tried adjusting the screw to lift/lower the beater but it hasn't helped, since it's hitting the side of the bowl, not the bottom. No matter what I do ...

...beater hits bottom of bowl beaters vibrate and hit side of bowl Your worm gear is no longer seated and that is more than likely because the housing cover is probably the old style plastic and it has ...

...the nickel plating seperating of the the beater surface unless it is actually hitting the side of the bowl. You may need to replace the beater as it is not good to eat food with metal in it. ...

beater hits the bowl with too much force and noise and does not mix the food at bottom of bowl. It seems off center. Hi - I've been searching for general info on KitchenAid stand mixers and ran across

...beater hits bottom of bowl I've tried to tighten screws with no results Try adjusting the height of the head by turning screw #36 counterclockwise a turn or so. This will raise the mixing head so the ...

...beater seems to hit the side of the bowl and it jams up. Have tried the adjustment screw and does not help. When it jams it sounds like a gear is stripping. Opened up the unit and all the gears seem ...

...side of the stand. Turn the mixer upside down and look up inside the stand which is hollow. You will see a screw. Tap the pin back into position and then tighten the screw. Now to fix the drooping, ...

KitchenAid hand mixer model#KHM5AP beaters hit each other When I turn the mixer on, the two beaters hit each other, like they're a little out of sync. They are not bent. It's like one ...

...beater hits the bottom of the bowl or is too far away from the bowl, clearance. Beater to Bowl Clearance: Your Stand Mixer is adjusted at the factory so the flat beater just clears the bottom of the ...

...beater hits the bottom of the bowl or is too far away from the bowl, clearance. Beater to Bowl Clearance: Your Stand Mixer is adjusted at the factory so the flat beater just clears the bottom of the ...