SOURCE: changing front wheel bearing
first take the wheel off
Then take the caliper off the rotor
Then take the rotor off the CV joint spindle
You will need to remove the three bolts that hold the bearing in place.
You will either need to remove the two bolts that hold the strut or
you will need a Puller.
SOURCE: steps to reset 2007 honda pilot oil gauge
From page 232 in the 2007 Honda Pilot Owners Manual.
1. Turn the ignition ON.
2. Press the Select/Reset knob until the engine oil life indicator is displayed.
3. Press the Select/Reset knob for more than 10 seconds. The engine oil life and maintenance item code(s) will blink.
4. Press the Select/Reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to "100".
SOURCE: I need the torque spec for the axle and the axle
Go to the autozone.com website and register there. It doesn't cost anything and you will have access to an online repair manual for the vehicle. (Kinda handy) They have a specification section, so the torque specs might be found there. Hope this helps and best wishes.
Testimonial: "hey thanks for the help"
SOURCE: need 2 know torque spec. on the front axle nut
according to ondemand5 (mitchell1) its 144 ft lbs
2,966 views
Usually answered in minutes!
×