Front axle torque setting - VS 1400 Intruder Suzuki Motorcycles

SOURCE: I replaced my front axle

call your local dealer and ask for service department. they can get that torque spec for you

SOURCE: front wheel axle pinch bolt torque setting

tight is right. just do it up tight and re-check it after a ride or two. it'll be fine. dont go at it like an animal though, i have never torqued wheel nuts and never had any trouble. if you dont trust your judgement ask the bike shop who is fitting your new tyre and balancing the wheel

SOURCE: I need the torque settings for changing the wheels on my BMW HP2

BMW workshop DVD says Front axle M22x1,5 (greased) = 50NM Front axle pinch bolts = 8NM Brake caliper to fork bolts = 30NM Rear wheel bolts M10x53x1,25 = 60NM
Brake caliper to fork torque needed if changing to SM wheels. Method. Torque greased axle bolt to 50NM, then compress forks several times without using brakes, then tighten both LHS axle pinch bolts to 8NM, then tighten both RHS axle pinch bolts to 8NM. Then test your brakes are working. Front finished. Rear. Torque to 60NM. I torque every second bolt as I work my way around the 5 Torx screws until they have all been torqued and double checked

SOURCE: torque setting front axle

front axle nut/bolt is 80nm
front axle pinch bolt 10nm

SOURCE: what is the axle torque

Thank you for contacting FixYa with your inquiry.
I have compiled a list of all the useful KTM torque setting that apply to your bike.

KTM Torque settings

1. Collar screw, front wheel spindle Front axle nut 40Nm 30ft lbs
2. Brake Caliper front Brake Caliper front Loctite 243 2 19ft lbs
3. Brake Disk, front Brake disk front Loctite 243 1 11ft lbs
4. Brake Disk, rear Brake disk rear Loctite 243 1 11ft lbs
5. Clamping screws, upper fork bridge Top triple clamp 20Nm 15ft lbs
6. Clamping screws, lower fork bridge Bottom triple clamp 15Nm 11ft lbs
7. Clamping screws, fork stubs Front axle pinch bolts 10Nm 7ft lbs
8. Collar nut, rear wheel spindle Rear axle nut 80Nm 59ft lbs
9. Hex nut swingarm bolt Swingarm nut 100Nm 74ft lbs
10. Hex collar screw handlebar clamp Upper handlebar clamps 20Nm 15ft lbs
11. Allen head screw handlebar support Lower handlebar clamps Loctite 243 4 30ft lbs
12. Shock absorber top Shock absorber top bolt 60Nm 44ft lbs
13. Shock absorber bottom Shock absorber botton bolt 60Nm 44ft lbs
14. Sprocket screws Rear sprocket bolts Loctite 243 3 25ft lbs
15. Ball joint for push rod Rear brake pedal pivot Loctite 243 1 7ft lbs
16. Engine mounting bolts Engine mounting bolts 45Nm 33ft lbs
17. Engine brace Engine brace 33Nm 24ft lbs
18. Screw adjusting ring spring preload Shock preload collar bolt 8Nm 6ft lbs
19. Spoke nipple Spokes 5Nm 4ft lbs
20. Other Screws on chassis M6 10Nm 7ft lbs
21. M8 25Nm 19ft lbs
22. M10 45Nm 33ft lbs
23. Other collar nutes on chassis M6 15Nm 11ft lbs
24. M8 30Nm 22ft lbs
25. M10 50Nm 37ft lbs
26. Front Sprocket 44ft lbs