Question about Toyota Corolla

2 Answers

Need a diagram for a 99 toyota corolla serpentine belt

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,267 Answers

1 Look at the belt routing (the way the belt runs around all of the pulleys). If you do not find a belt routing diagram under the hood, you'll want to make your own sketch.
2 Find the belt tensioner pulley, usually located just above the crankshaft.
3 Insert your 19mm ratchet or breaker bar tool into the tensioner bolt head and pull toward the front of the vehicle to release tension on the belt.
4 Slip the old belt off of the pulleys.
5 Reference your belt routing diagram to get the new belt seated on all pulleys. Make sure any grooves on the belt rest against grooved pulleys, and that smooth belt surfaces contact smooth pulleys.
6 Slowly release the tensioner and check for correct belt tension.
7 Run the engine and observe for flapping or noise, signs of incorrect installation.
need a diagram for a - sodeep_2.jpg

Posted on Jun 19, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 3,018 Answers

  • Here is the serpentine diagram for a 1999 Toyota Corolla with and without AC.

need a diagram for a - ironfist109_31.gif


  • Thank you for using FixYa

Regards, Tony

Posted on Jun 19, 2011

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

BCAS1298
  • 3092 Answers

SOURCE: Do you have a Serpentine Belt routing diagram for

Hope this help's.3604652.png

Posted on Jun 28, 2010

  • 65 Answers

SOURCE: need belt schematic for 2006 toyota corolla

I can get you a diagram on monday but it goes from the alternator to the power steering pump then around the tensioner pulley then around the crank pulley then to the a/c compressor then pull on the tensioner to give you some slack and slip it on the waterpump.I hope that helps.Let me know if you still need the diagram

Posted on Nov 29, 2008

  • 1757 Answers

SOURCE: Need a serpentine belt diagram for 2004 Toyota

Sorry for the delayed response.
CLICK
on the following LINK. It has the Serpentine Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks.
http://www.2carpros.com/car_repair_information/year/2004/make/toyota/model/corolla/2004_toyota_corolla_drive_belt_routing_diagram.htm

Posted on Mar 04, 2010

jturcotte
  • 8980 Answers

SOURCE: need toyota corolla 2002 serpentine belt diagram

I assume you have the 1.8 liter engine. If not, please get back to me.

jturcotte_82.gif

Posted on Nov 06, 2010

greg_margo
  • 1959 Answers

SOURCE: I need a serpentine belt diagram for 2007 Toyota

Below is a link to a diagram. The TP is the tensioner pulley.
http://www.chiltonlibrary.com/content/images/7923/images/79234g54.gif

Posted on Jul 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Belt routing diagram for1999 Toyota Corolla


Thats a 98 belt routing same engine. 99 wouldnt load1021f4c.jpg

Jul 02, 2010 | 1999 Toyota Corolla

1 Answer

Need a serpentine belt diagram for 2004 Toyota


Sorry for the delayed response.
CLICK
on the following LINK. It has the Serpentine Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks.
http://www.2carpros.com/car_repair_information/year/2004/make/toyota/model/corolla/2004_toyota_corolla_drive_belt_routing_diagram.htm

Feb 20, 2010 | 2004 Toyota Corolla

1 Answer

Replace serpentine belt


My apologies for the delayed response. I am going back to answer unanswered questions.

CLICK
on the following LINK. It has all the Diagrams for your Serpentine Belt that you will need.
If you would: Before Clicking let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my sincerest apologies...
Thanks!

http://www.2carpros.com/car_repair_information/year/1996/make/toyota/model/corolla/1996_toyota_corolla_drive_belt_routing_diagram.htm

Nov 09, 2009 | 1996 Toyota Corolla

1 Answer

Need serpentine belt diagram fo r2001 toyota


if the pulley is smoth the belts back rides on that surface if it is ribbed or lined the inside of the belt rides on that surface , you local parts store should have a diagram or dealership .

Aug 27, 2009 | 2001 Toyota Corolla

1 Answer

Need diagram for a serpentine belt of 2006 toyota corolla 1.8 wit


Is the diagram on a sticker, on the underside of the hood?

Aug 20, 2009 | 2006 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

12,902 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85111 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...