At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if it starts with starter fluid then its a fuel problem. check the fuel pressure and volume with a gage. these require at least 56lbs pressure to open the injectors and if the pressure is at 52lbs the they will not open. these use the pressure to open the poppet injectors and have a problem with the spider lines cracking and leaking fuel inside the intake. this is probably why it won`t start on its own.
i would check and see if spark pluges are firing. you can take one out and plug into spark plug wire then let the bottom of the plug sit on engine and get someone to try to start while you look at the plug to see if there is any fire. if you have no fire or fuel it would be the crankshaft sencer. it could be the timing belt but the motor would sound different turning over then it used to.
starting fluid is a thing of the past. dont use it. this car doesnt have a carb, its a throttle body/ electronic fuel injection system. you most likely have a fuel pump or fuel pressure regulator issue. test the fuel pressure, should be anywheres from 35-50 psi
You say t pump is coming on, but do you fuel coming up to the fuel injector rail? You can check for fuel by pushing down the valve located at the left front side of fuel rail. It looks like a tire air fill stem. Be very careful as fuel is under 40 psi pressure and can spray all over the place. do this with engine OFF and have a rag to cover the valve. Just press with tip of screwdriver and be sure valve is covered. If a little gas come out,you know you have fuel. If not gas then check fuel delivery system i.e pump, filter, lines or pickup tube.
If there is fuel in the rail, then there is most likely a problem with the control module (computer). Check for fault codes with an OBD II reader. You can usually rent one at your local part store. You can look up fault codes to find out where the problem might lie.
More questions, just leave in comments.
Good Luck.
J Thanks for using FixYa!! I provide my answer for free as a public service - a 4 THUMBS rating and POSITIVE Comment is really appreciated for the FREE answering of your question.
LtCmdr
Spock said: "An ancestor of mine maintained, that if you eliminate the
impossible, whatever remains, however improbable, must be the truth."
Hi, The carb is gummed up from sitting. The best solution is to take it apart and clean it. The starter fluid indicates that it has clogged jets or stuck floats. The good news is that if it cranks with the starter fluid everything else is probably OK. Good Luck!
×