- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ambient air temp sensor is same as intake air temp sensor. IAT Sensor on this vehicle is located in the intake air duct between filter and throttle body.
Location of Intake Air Temperature Sensor:
The intake air temperature sensor, which is mounted on the mass air flow meter, monitors the intake air temperature. The intake air temperature sensor has a built-in thermistor with a resistance that varies according to the temperature of the intake air. When the intake air temperature becomes low, the resistance of the thermistor increases When the temperature becomes high, the resistance drops .
P0112 is the code for a intake air sensor problem. If you can buy one seperate it will be located between the Air filter and the Throttle Body ... usally near the Mass Air flow sensor . I am a Jaguar Tech our are located inside the Mass Air sensor . Also ck the actuall housing of the air filter assembly
The Intake Air Temperature/Manifold Absolute Pressure sensor is located on the left (driver's) side of the air intake plenum. I think pretty much anyone who has a license to operate a screwdriver can handle the job. It is fastened to the plenum with a single screw.
Disconnect the electrical connector, remove the screw, remove sensor, reverse procedure to install. It doesn't get any easier than that.
Labor time to complete the repair at the dealer is 0.2 hours (12 minutes).
the mass air flow is part of the throttle body assembly. its where the big air hose from the air filter hooks to on the motor. here is a picture to aid you. hope this helps
The IAT on the 1.8 engine is located in driver side follow before the air box and you will see a sensor thats the intale air temp sensor, hope that helps
IAT SENSOR IS MOUNTED INSIDE INTAKE AIR HOSE TO THE AIR CLEANER ASSEMBLY. THE MASS AIR FLOW SENSOR IS ALSO MOUNTED TO THE INTAKE AIR HOSE OF THE AIR CLEANER ASSEMBLY. O2 SENSORS LOCATION.YOU HAVE 2 # O2 SENSORS.YOU HAVE ONE THE EXHAUST MANIFOLD.THE OTHER SENSOR LOCATED DOWN AT THE CATALYTIC CONVERTER.
should be a little single wire connected to the air filter box. located on the clean side of the air filter. if not it will be between the air filter box and the throttle plate usually located on the air duct hose going from the air filter box to the throttle plate.
×