20 Most Recent 1997 Dodge Intrepid Questions & Answers

0helpful
1answer

1997 Dodge Intrepid ES 3.5. No power to ignition solenoid coil pack pigtail.

Some help in the videos. The best course is a mobile auto electrician with a pro grade scan tool computer. Diagnose in 15 minutes.
3/15/2023 2:14:38 AM • 1997 Dodge... • Answered on Mar 15, 2023
0helpful
1answer

How can I reinstall the ashtray light?

The ashtray light assembly probably clips into the rear of the ashtray.
8/3/2021 5:34:09 PM • 1997 Dodge... • Answered on Aug 03, 2021
0helpful
3answers

Every once in a while all my dash dial will go out, fuel gauge, speedometer, oil pressure, temp. gauge.

It sounds to me like you have a bad ground wire (common occurrence when after-market sound systems are added). Check the ground wire behind the cluster, making sure it is solidly connected to chassis.
10/6/2019 9:55:15 AM • 1997 Dodge... • Answered on Oct 06, 2019
0helpful
1answer

How do you get to the bank 1 #2 o2 sensor wire plug connector on a 1997 dodge intrepid 3.5

It is the V6 engine you have two sensors on the front and two at the back that way!!!
6/21/2018 2:43:14 AM • 1997 Dodge... • Answered on Jun 21, 2018
0helpful
1answer

My 1997 dodge intrepid is

Code 700 and 740 r transmission and torque converter malfunctioning. Which most likely is caused by not enough fluid do to the leak. Code 401 is a egr (exhaust gas recirculation) valve problem. Most likely it's dirty. It depends on location of leak as to wether or not you can do it yourself. If leak is from pan you can get a filter and gasket kit. Remove all bolts surround pan and remove be careful as the residual fluid needs to be captured. Remove old filter replace with new filter. Use caution and scraping old gasket off pan. Check pan rim for any distortion or dings. Put new gasket on pan replace pan on vehicle using appropriate torque and sequences for tightening of bolts
11/19/2017 8:36:43 PM • 1997 Dodge... • Answered on Nov 19, 2017
0helpful
1answer

My 97 intrepid 3.5l acts like it is not firing, I removed inspection plates brought it to TDC and everything is in time (belt is good and tight all marks line up) . I tried cranking again it fired and

Replace crankshaft ,and camshaft sensor to be sure ... mine drove me nuts for almost a whole year ...
11/19/2017 6:39:43 AM • 1997 Dodge... • Answered on Nov 19, 2017
0helpful
1answer

Intrepid won't shut off

Use Diagnostic Unit, you will not find your fault any other way, (ie) fitting parts that you might think will work , is costly.
10/29/2017 11:23:36 AM • 1997 Dodge... • Answered on Oct 29, 2017
0helpful
1answer

1995 Dodge Intrepid will turn over but will not fire.

Nothing seems obvious from reviewing the diagram. You might want to test the ignition switch for continuity to the start buss. 0900c1528006ae3f-nmkzohv23dbsppgyku1m4xn4-1-0.gif
9/16/2017 11:44:47 PM • 1997 Dodge... • Answered on Sep 16, 2017
0helpful
1answer

I have 2001 dodge durango will crank and start for

Check starter relays & fuses check all fuses for electrical modulesdrivers side inner finder electrical pannel for starter check all fuses and relays
9/15/2017 9:17:08 PM • 1997 Dodge... • Answered on Sep 15, 2017
0helpful
1answer

Sunroof won't close all the way.

Sounds like the sun roof circuit breaker is tripping before fully closing. The C/B is in the fuse panel And looks like a fuse but is metal instead of plastic. The windows use the same style breakers. Change all of them, they are old. Also lubricate the tracks with lithium grease (spray can). Window tracks too.
8/25/2017 10:20:04 PM • 1997 Dodge... • Answered on Aug 25, 2017
0helpful
1answer

My car is starting but once you press on the gas it bogs out. Now I had someone look at it and they mentioned three things the throttle posiition sensor, map sensor, and the egr valve. The guy said th

forget the casual guesses as that cost money go and have the fault codes read then fix what is faulty
7/26/2017 7:31:38 AM • 1997 Dodge... • Answered on Jul 26, 2017
0helpful
3answers

My 1997 dodge intrepid 3.5

Try cleaning and tightening battery cables at both ends, A dirty or loose connection can cause this. Mike
7/2/2017 8:38:51 PM • 1997 Dodge... • Answered on Jul 02, 2017
0helpful
1answer

97 intrepid check engine light...

something else you have to have all of the original system in place for the ECM program to operate properly removing for convenience is not the way to go as it will throw up codes and upset the economy of the vehicle
6/24/2017 8:57:04 AM • 1997 Dodge... • Answered on Jun 24, 2017
0helpful
1answer

We have a 1997 Dodge

The Intrepid doesn't have a vacuum line. It uses a electric motor called a "blend door actuator". It's located on the underside of the heater box near the center of the car.
6/14/2017 6:56:37 AM • 1997 Dodge... • Answered on Jun 14, 2017
0helpful
1answer

1997 dodge intrepid is stuttering in reverse

That fluid and filter is due to be changed. The stuttering is evidence off low charge pump pressure at the reverse clutch pack . Filter service should be done every 80,000 miles.
6/2/2017 5:22:12 PM • 1997 Dodge... • Answered on Jun 02, 2017
0answers
Not finding what you are looking for?

1,180 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Intrepid Dodge

  • Intrepid Dodge

Most Popular Question

97 dodge inteprid 3 5 just replaced

  • Cars & Trucks
Loading...