1994-99 BUICK LESABRE
CHANGE OIL SOON Light
1. CHANGE OIL SOON light will come on when engine oil has broken down enough to require changing. After changing oil, reset oil life display.
2. To reset light, turn ignition on. Open glove box to access oil reset button. Press and hold oil reset button in glove box for at least 5 seconds, but not longer
than 60 seconds. The CHANGE OIL SOON light will flash 4 times to indicate light has been reset.
You can find the reset procedure here https://resetoillight.com/Buick/oil-change-light-reset-Buick-LeSabre-1991-1992-1993-1994-1995-1996-1997-1998-1999-2000-2001-2002-2003
Press the trip meter select/reset pin until you the oil life
reminder is displayed
Press and hold the select/reset pin down for approximately 10
seconds until the oil life reminder is blinking
Press and hold the select/reset pin down for another 5 seconds or
so until the oil life reminder is reset to 100%
I’m happy to help further over the phone at https://www.6ya.com/expert/charles_6bf94c079488b145
SOURCE: oil display will not reset on the monitor
Turn ignition to "ON", slowly press accelerator to the floor three times within five seconds, wait a few seconds and you will hear three tones, the "Change Oil" light will turn off. Turn the ignition to "OFF" and the light will be reset
SOURCE: 2007 Saturn Vue Oil Life monitor light won't reset
key on hit brake pedal 3 times not the gas
SOURCE: C230 reset oil life
Answer should be in the owner's manual. Or go by the local MB dealer the servicr dept. will do it for you free.
SOURCE: How do I reset the oil life monitor?
To clear "TIME FOR SERVICE" from the Saab Information Display, press and hold the "CLEAR" button for at least 8 seconds. A signal will be heard indicating reset. After the 21st restart of the vehicle, the "TIME FOR SERVICE" message will be cancelled.
Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three times within five seconds. If the CHANGE OIL SOON indicator flashes two times, the system is resetting. Turn the key off after the the light has finished flashing, then start the vehicle. If the CHANGE OIL SOON indictor comes back on, the engine oil life monitor has not reset. Repeat the procedure again. If the vehicle is equipped with the U20 option code, the vehicle as an oil life low indicator. The oil life low indicator shows an estimate of the oil's remaining useful life. When the oil life index is less than 10 percent, the display will show OIL LIFE LOW. To reset the oil life monitor, press and hold the MODE button until the light appears next to OIL LIFE. Press and hold the trip RESET button until the oil life percentage changes to 99 percent.
5,384 views
Usually answered in minutes!
×