Crankshaft firing postion sensor

Is this a deisel motor? If so, it will not have a crankshaft sensor

That sensor simply tells the computer when to fire the spark plugs, as the crankshaft turns it also turns the camshaft thus how the plugs fire

located on the inner side,like bmw,on the flywheel support area,
just outside of the oil seal,

well if ur not getting spark and u changed all of the ignition components lets think about the computer in order for the ignition to work you have crankshaft position sensor that fires the fuel injectors and the spark change that and if still nothing then change the camshaft postion sensor that sensor tells the computer that the 1 piston has came all the way up and it tells the crankshaft sensor to do its thing

you cannot check crankshaft postion sensor if your car has hard starts or does not start your crankshaft postion sensor is faulty it tells cars pc when to fire spark and to what cylinder to fire it to



if it helps please leave a 4 thumbs review if it helps

are you gettin fuel ? are you getting spark ? if so is it bright blue it should be if its orange is bad
check and replace fuel filter if all that is good check and replace crankshaft postion sensor and or cam shaft postion sensor as they tell the ecu when to fire the spark and to what cylinder


lmk if it helps please give me good feedback

are you getting a rich blue spark ?? not orange if no coils need replaced if yes crankshaft positions

sensor or cam shaft postion sensor is bad they tell the ecu when and what cylinder for the coils to fire spark to

if it helps how about a thumbs up

replace your crankshaft postion sensor and cam sharf position sensor they tell you car when to fire spark and to what cylinder to fire to they work hand in hand also check your spark it should be blue not orange if orange replace distributor and rotor

if this helps please give me good rating

well sounds like a crankshaft postion sensor or camshaft positon sensor both tell the cpu when to fire spark

My online Sonata manual shows these possibilities, but does not identify which applies specifically to 2000 Sonata.
Also, when you talk to the dealership parts counter, you'll need to know whether your 2000 Sonata is (a) 4-cylinder 2.4L MFI DOHC engine, or (b) 6-cylinder 2.5L MFI DOHC engine.
Its easy to tell - just count your spark plug wires.

-- begine excerpt from 2000 Hyundai Sonata Repair guide --

The crankshaft position sensor is located next to the flywheel.
The crankshaft position sensor is located next to the flywheel/torque converter.
The camshaft position sensor is located on the engine near the timing belt cover and under the upper radiator hose.
The crankshaft position sensor is located on the driver-s side of the vehicle, down by the lower radiator hose.
The crankshaft position sensor is located on the engine near the crankshaft pulley.
The crankshaft position sensor is located at the front of the engine near the timing belt.

--- end excerpt from 2000 Hyundai Sonata repai guide ---